FS: Turbo Calipers, Spindles, Hubs
#1
Drifting
Thread Starter
Join Date: Dec 2002
Location: Phila.
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
FS: Turbo Calipers, Spindles, Hubs
Was going to put these on my N/A but am doing something else, the calipers are in good working condition, the paint will clean up nice but in order to look new they'll have to be repainted. The hubs and spindles are included in order to make this an easy bolt on modification for owners with early offset cars. Early N/A owners will need to have the drivers side spindle drilled through for the speedometer cable, a cheap modification done at any machine shop. The rear calipers will bolt on to any 944 rear trailing arm. Also included is a brand new axle set of Mintex pads. I am also able to include brand new Genuine Porsche rotors for 10% above cost (5% savings over Sunset) if the buyer wishes. Total price is $400 for Calipers, hubs, spindles, brake dust shields, and pads, or $350 for just the calipers and pads. I will ship these in the $8 flat rate boxes via USPS, most likely 2 boxes needed for just calipers and 4-5 for everything.
#4
Drifting
Thread Starter
Join Date: Dec 2002
Location: Phila.
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
DVC, my hard drive just crashed (lap top hard drive) but I am looking into seeing if anything can be salvaged. If so I'll send u the pic.
Sheng, pm replied
Sheng, pm replied
#6
Drifting
Thread Starter
Join Date: Dec 2002
Location: Phila.
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
#7
Nordschleife Master
bump, now on ebay at a reduced price
http://cgi.ebay.com/ebaymotors/944-T...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/944-T...spagenameZWDVW
Trending Topics
#9
Nordschleife Master
Thanks.
#11
Drifting
Thread Starter
Join Date: Dec 2002
Location: Phila.
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts