Custom Leather dash Early 944 924 Speaker Delete
#31
Almost Addicted
Rennlist Member
Rennlist Member
Originally Posted by V2Rocket_aka944
Have him fly out to you to do the work and then when he's done there can make the quick hop to my place
Not my best work, but I think it turned out pretty well.
#32
Rainman
Rennlist Member
Rennlist Member
Rob, do you think you could stitch the leather together beforehand in a sort of prepared DIY kit? If you have a template of the dash do you think you could make more pieces, attach them and have them ready to put on a dash and secure?
If so, how much do you think it would run for just materials and the attachment labor? (No installation)
If so, how much do you think it would run for just materials and the attachment labor? (No installation)
#33
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Originally Posted by V2Rocket_aka944
Rob, do you think you could stitch the leather together beforehand in a sort of prepared DIY kit? If you have a template of the dash do you think you could make more pieces, attach them and have them ready to put on a dash and secure?
If so, how much do you think it would run for just materials and the attachment labor? (No installation)
If so, how much do you think it would run for just materials and the attachment labor? (No installation)
I'm not sure what you mean by "make more pieces". My cover is already completely sew together.
I have patterns for the speaker, no speaker, and a dual gauge pod in place of the speaker.
Rob
Last edited by Rob M Budd; 06-30-2007 at 08:03 AM.
#35
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Originally Posted by V2Rocket_aka944
Are the kits you sell already sewn? Or is that part of the DIY thing?
How much more would it cost for you to sew them together before shipping?
How much more would it cost for you to sew them together before shipping?
#38
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Originally Posted by V2Rocket_aka944
What is used to fill cracks, etc? Bondo?
I use several different types of fillers.
Bondo
SEM Flexible polyester putty
Carbo fill
Polyurethane fillers and Epoxy fillers.
The object is to get a durable surface that matches the surrounding area.
#41
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Originally Posted by V2Rocket_aka944
How much does a dash weigh? Cost to ship?
Theres a very good chance youll be getting my business soon.
Theres a very good chance youll be getting my business soon.
Its less than 15 lbs. Cost to ship is $20-$30
#42
Originally Posted by Andy1212
This is why PM'ing was invented.
Have a nice day.
#44
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by ksucat90
Andy, this is not why PM was invented. PM was "invented" to send messages that you do not wish to share with the general populous. This information, I have found very helpful, and I would suspect that others have too. That my friend, is why they "Invented" Message boards!
Have a nice day.
Have a nice day.
Great work Rob!
#45
Rainman
Rennlist Member
Rennlist Member
super-dead thread revival
im considering the speaker delete when i recover my dash. however im concerned about the central mounting point that normally is accessed by removing the speaker grille. it would take some fancy fingerwork to get the nut on the stud because youd be going in through the ac vent hole...can the dash be securely mounted without this middle point? how has this been addressed?
im considering the speaker delete when i recover my dash. however im concerned about the central mounting point that normally is accessed by removing the speaker grille. it would take some fancy fingerwork to get the nut on the stud because youd be going in through the ac vent hole...can the dash be securely mounted without this middle point? how has this been addressed?