MAF for 944 S2??
09-24-2010, 01:23 AM
#91
Drifting
Join Date: Dec 2002
Location: Phila.
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Miller Performance is developing a MAF kit for the S2 that uses their W.A.R chip, which is laptop programmable
so far they have gotten 10whp and 10 ft-lbs from the 8 valve N/A (automatic)
so far they have gotten 10whp and 10 ft-lbs from the 8 valve N/A (automatic)
09-24-2010, 11:35 AM
#92
Three Wheelin'
I've pretty much finished the definition file for the S2... That way S2 owners can tune with TunerPro using my DIY. The last thing is to get the AFR readout scale correct - it is hard because I don't have access to an S2, and definitely not an S2 with a WBO2 so I can check AFR...
Best,
Mike
09-24-2010, 11:28 PM
#94
Three Wheelin'
Not yet, but about to drop coin on a Zeitronic. What's your recommendation?
My car is ex-Japan so I'm not sure what it uses in the way of maps. The workshop manual says the selection between Japan/CA and ROW is deleted for '91, however the coding plugs are still there. I'm not obliged to run a cat so would be keen to do a cat delete and try the non-cat map.
Cheers,
Mike
My car is ex-Japan so I'm not sure what it uses in the way of maps. The workshop manual says the selection between Japan/CA and ROW is deleted for '91, however the coding plugs are still there. I'm not obliged to run a cat so would be keen to do a cat delete and try the non-cat map.
Cheers,
Mike
09-25-2010, 01:59 AM
#95
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
Zetronix setup is a good one. The non-cat maps aren't significantly different... I'm looking for an S2 to test with TunerPro - must have a WBO2.
09-25-2010, 03:05 AM
#96
Three Wheelin'
