Interior pictures
#31
Former Vendor
Originally Posted by gregeast
Paul: I haven't talked to you yet b/c I've been paralyzed by the possibilities...
All black w/black stitching
All black w/champagne stitching
All champagne
Black rim and champagne center, maybe with champagne stitching
Ah, decisions, decisions. And don't even get me started on engraved crests or a crest badge, etc.
Glad to know you were able to eliminate the bumps, I'm sure it looks even better
All black w/black stitching
All black w/champagne stitching
All champagne
Black rim and champagne center, maybe with champagne stitching
Ah, decisions, decisions. And don't even get me started on engraved crests or a crest badge, etc.
Glad to know you were able to eliminate the bumps, I'm sure it looks even better
these are all excellent possibilities.
Here is a shot of what I had in mind. This is just a rough draft:
You should keep in mind where you usually rest your hands on the steering wheel. That particular area should probably be black in a 2-tone design.
Paul
#32
Addict
Rennlist Member
Rennlist Member
Thanks for the pic of the 2-tone wheel Paul, just what I needed, another possibility!
Since this thread was originally about 'modernizing' our interiors, here's a list of what I've done and a couple of pictures:
1. Leather dash cover from Rob Budd. Black on top, Champagne on bottom
2. Leather console cover from Rob Budd
3. Two tone shift ****. Black is stock, leather boot is from Rob Budd
4. Stainless shifter cap from Joe Jackson (Rennbay has them too)
5. Aluminum gauge rings - Ebay German vendor
6. 'PORSCHE' on steering wheel in brushed aluminum - decal from 35thSLP
7. Autometer Sport Comp gauges - Egauges.com
8. 968 door panels. Originally black, dyed quilted part Champagne w/SEM dye
9. 968 red hazard switch - Sunset Porsche
10. Aluminum **** covers - Prestige Parts in the UK
11. Blaupunkt Acapulco CD/MP3 unit - Ebay
12. Red led instrument lights - Flamingeye.co.uk
13. Armrest cover in champagne leather - Aglausa.com
14. 968 outside temp gauge - Ebay (not installed yet)
15. Aluminum vent louver control covers - Jageng.com
16. Lloyd's floormats - Pelican Parts
17. Seats refinished/redyed professionally- Cindi Westmiller, local leather expert
18. Partridge - In a pear tree...
Whew, I think that's all, I'm sure I forgot something... Here's the pics, I included the second one because it shows the 968 door panels.
Since this thread was originally about 'modernizing' our interiors, here's a list of what I've done and a couple of pictures:
1. Leather dash cover from Rob Budd. Black on top, Champagne on bottom
2. Leather console cover from Rob Budd
3. Two tone shift ****. Black is stock, leather boot is from Rob Budd
4. Stainless shifter cap from Joe Jackson (Rennbay has them too)
5. Aluminum gauge rings - Ebay German vendor
6. 'PORSCHE' on steering wheel in brushed aluminum - decal from 35thSLP
7. Autometer Sport Comp gauges - Egauges.com
8. 968 door panels. Originally black, dyed quilted part Champagne w/SEM dye
9. 968 red hazard switch - Sunset Porsche
10. Aluminum **** covers - Prestige Parts in the UK
11. Blaupunkt Acapulco CD/MP3 unit - Ebay
12. Red led instrument lights - Flamingeye.co.uk
13. Armrest cover in champagne leather - Aglausa.com
14. 968 outside temp gauge - Ebay (not installed yet)
15. Aluminum vent louver control covers - Jageng.com
16. Lloyd's floormats - Pelican Parts
17. Seats refinished/redyed professionally- Cindi Westmiller, local leather expert
18. Partridge - In a pear tree...
Whew, I think that's all, I'm sure I forgot something... Here's the pics, I included the second one because it shows the 968 door panels.
Last edited by gregeast; 09-14-2006 at 10:31 AM.
#34
Race Director
Dang Greg, I need to get in gear. I also need the Prestige aluminum **** covers (Did you get those off ebay..if so how much vs. the store price?) Do the vent covers just glue on or do the kind of wrap around and are held with glue? Do they have to be engraved? Thanks.
#36
Addict
Rennlist Member
Rennlist Member
Sam: I just broke down and bought the **** covers direct from Prestige in the UK. I hope you get them, I'm anxious to see them on the CF trim. The vent covers wrap around and then glue on and yes, they do have them available with 'turbo' or '944' on them. I went back and forth on whether to put any script on them and ultimately decided to not put anything on them, just wasn't sure if it needed to say 'turbo' four different places, I figured if I was confused as to what car I was driving, all I needed to do was put my right foot down.
Testarossa - If you're feeling spunky, how about a little PS of the airbag section of the steering wheel in champagne? Despite your able assistance, I still suck at PS!
This has kind of been my inspiration:
Testarossa - If you're feeling spunky, how about a little PS of the airbag section of the steering wheel in champagne? Despite your able assistance, I still suck at PS!
This has kind of been my inspiration:
#37
Former Vendor
That is a superb interior Greg, the problem is that you didn't leave much for me to do
You seem to have made all the right choices and Rob did a great job.
If I had to pick on something, it would be the leather console cover. It would have been nice to have 2 French seams on the edges to give it an elegant custom look that ties in with the rest.
But that is minimal and certainly not necessary.
The only thing left I could help you with aside from the steering wheel, as those seats if you ever decide to bring them back to new.
I am coming out with an updated versions of the traditional Porsche seats where I will replace the piping with French seams. That updates the look tremendously while staying true to the original design.
I will post some pictures when they are ready. I'm doing 2 sets of 928 seats right now, but the technique will easily translate to the 944.
Impressive interior Greg,
Paul
You seem to have made all the right choices and Rob did a great job.
If I had to pick on something, it would be the leather console cover. It would have been nice to have 2 French seams on the edges to give it an elegant custom look that ties in with the rest.
But that is minimal and certainly not necessary.
The only thing left I could help you with aside from the steering wheel, as those seats if you ever decide to bring them back to new.
I am coming out with an updated versions of the traditional Porsche seats where I will replace the piping with French seams. That updates the look tremendously while staying true to the original design.
I will post some pictures when they are ready. I'm doing 2 sets of 928 seats right now, but the technique will easily translate to the 944.
Impressive interior Greg,
Paul
#39
Addict
Rennlist Member
Rennlist Member
Originally Posted by Champagne
If I had to pick on something, it would be the leather console cover. It would have been nice to have 2 French seams on the edges to give it an elegant custom look that ties in with the rest.
Paul
Paul
Testarossa - Thanks man, you rock. Interesting look, I'll have to ponder that one. If I did that I think I'd have Paul do champagne stitching on the wheel rim to tie it all together. What do you guys think?
#40
Race Car
Join Date: Jun 2004
Location: State of Confusion
Posts: 3,696
Likes: 0
Received 0 Likes
on
0 Posts
No problem.
My answer is no on the steering wheel. Too much champagne will get you drunk
Like the Ferrari above I think you need the contrast.
But what do I know..I have an all black interior...
My answer is no on the steering wheel. Too much champagne will get you drunk
Like the Ferrari above I think you need the contrast.
But what do I know..I have an all black interior...
#41
Addict
Rennlist Member
Rennlist Member
Originally Posted by testarossa_td
No problem.
My answer is no on the steering wheel. Too much champagne will get you drunk
Like the Ferrari above I think you need the contrast.
But what do I know..I have an all black interior...
My answer is no on the steering wheel. Too much champagne will get you drunk
Like the Ferrari above I think you need the contrast.
But what do I know..I have an all black interior...
Here's what I really want to do with the steering wheel...and yes, it will fit and the airbag can be connected. I have the wheel, just trying to source an airbag for less than $500!
#43
Set to Full-Auto
Rennlist Member
Rennlist Member
Greg posesses THE BEST 944 series interior I have EVER seen in my entire life. If my car were even half as cool as his...........well, I guess I would be half as cool.........but you get the idea!
#44
Addict
Rennlist Member
Rennlist Member
Originally Posted by U-30AT
Greg - luv the black carpet with the tan seats! That two-tone look is the juice! Did it originally come with that combo or did you swap the seats / carpet?
#45
Addict
Rennlist Member
Rennlist Member
Originally Posted by sharky47
Greg posesses THE BEST 944 series interior I have EVER seen in my entire life. If my car were even half as cool as his...........well, I guess I would be half as cool.........but you get the idea!