Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

My saga begins: I'm getting my neighbor's 944 Turbo

Thread Tools
 
Search this Thread
 
Old 06-10-2006, 02:12 PM
  #31  
silverbullet
Pro
 
silverbullet's Avatar
 
Join Date: Sep 2004
Location: Maryland
Posts: 679
Likes: 0
Received 0 Likes on 0 Posts
Default

I bought my car not knowing that it had sat for about two years in garage. As soon as I started driving it I had problems.
I replaced: all front seals, waterpump, timing belt, all oil lines, factory exhaust headers, and a bunch more stuff. Worked out to about $7000.

Now, if you do get the car, I would get it running or tow it to a Porsche mechanic, even an Official Service Center. Have them do a PPI and give you a list of all the things that require immediate attention. It will cost about $300-400 but could save you thousands. Since it's free or even just a few grand you have alot more money/room to play with then most people.

Personally, since the guy is now talking about selling it to you, I would find another car. You will spend about $6000 to $10,000 getting her right. If you save up and watch for deals on Rennlist, you could get a near perfect 951 with all the bugs worked out for the same money and be a much happier man.

Welcome to Rennlist!
Old 06-10-2006, 11:34 PM
  #32  
theiceman
Team Owner
 
theiceman's Avatar
 
Join Date: Aug 2005
Location: Cambridge Ontario Canada
Posts: 26,992
Received 1,118 Likes on 800 Posts
Default

Personally I found the 944 compared to my 3.0l 911 a money pit. I would forget about the 944 and seriously look at a 911sc or carrera. They are simple . easy to work on and a blast to drive.

Good luck.
Old 01-20-2007, 03:28 PM
  #33  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

Update: I just got the keys/title to the car, as a gift. I'm going to tow the car into my driveway just as soon as I can replace the clutch master cylinder on my truck.

Let the fun begin!
Old 01-20-2007, 04:36 PM
  #34  
MichelleJD
Jane Bond 007
Lifetime Rennlist
Member
 
MichelleJD's Avatar
 
Join Date: Apr 2002
Location: North of the GTA
Posts: 9,773
Received 28 Likes on 17 Posts
Default

Old 01-20-2007, 04:48 PM
  #35  
Mike C.
Drifting
 
Mike C.'s Avatar
 
Join Date: Aug 2002
Location: Eastern CT
Posts: 3,224
Likes: 0
Received 1 Like on 1 Post
Default

Great! It sounded like it was going to end up sitting a lot longer while (if) his relative ever came to collect it. I would not try to start it with the current timing belt - just take the head off and hit the valves with a hammer instead... First, pull the timing belt covers off and take a good look at the belts, pull the spark plugs, put the appropriate sized socket on the crankshaft pulley bolt and try to turn the engine by hand (trans out of gear). With no plugs in it should be pretty easy to turn. Watch the T-belt as you turn slowly - does it look like it's cracking and about to come apart? Hopefully you can turn it far enough to line up the timing marks. You will now be ready to install a new T-belt. Either you will have to invest in timing belt change tools (suggest Arnworx) or borrow them from someone. A timing belt only cost $15 - $40 (depending on brand & source) so it is probably worth spending to avoid bending valves (I have a hunch that may be why it was parked anyway). It would be a good thing to have someone help you who has done a timing belt before too. Good luck!
Old 01-20-2007, 04:54 PM
  #36  
Mike C.
Drifting
 
Mike C.'s Avatar
 
Join Date: Aug 2002
Location: Eastern CT
Posts: 3,224
Likes: 0
Received 1 Like on 1 Post
Default

One more thing, Haynes prints a decent, get you acquainted-manual for the 944. It has nothing turbo specific in there but it's a good place to start in familiarizing yourself with 944 engine, brakes, suspension, clutch. It has a good explanation of doing the timing belt (but assumes you don't have the tensioner tool). For $20 it's worth it.
Old 01-20-2007, 09:40 PM
  #37  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike C.
One more thing, Haynes prints a decent, get you acquainted-manual for the 944. It has nothing turbo specific in there but it's a good place to start in familiarizing yourself with 944 engine, brakes, suspension, clutch. It has a good explanation of doing the timing belt (but assumes you don't have the tensioner tool). For $20 it's worth it.
Thanks! I'll order one today.
Old 01-23-2007, 09:37 AM
  #38  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

I should mention: the car is an 86 Turbo, not an 87, as I originally posted.
Old 01-23-2007, 09:50 AM
  #39  
I love porsche
Three Wheelin'
 
I love porsche's Avatar
 
Join Date: Apr 2005
Location: NJ
Posts: 1,405
Likes: 0
Received 0 Likes on 0 Posts
Default

any pictures yet? this project sounds fun
Old 01-23-2007, 10:13 AM
  #40  
Stephenwz968
Three Wheelin'
 
Stephenwz968's Avatar
 
Join Date: Nov 2004
Location: Hopewell, NJ
Posts: 1,549
Likes: 0
Received 2 Likes on 2 Posts
Default

Sounds like a really fun project!
Old 01-23-2007, 11:00 AM
  #41  
Darwantae951

 
Darwantae951's Avatar
 
Join Date: Dec 2004
Posts: 11,034
Received 25 Likes on 21 Posts
Default

We want pictures! You'll quickly find that rennlist members are picture ******! You stated it was gold over red? That's an interesting combo that I haven't seen yet. I'd love to see a pic of it!

-Darwin
Old 01-23-2007, 12:24 PM
  #42  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Bonestock951S
We want pictures! You'll quickly find that rennlist members are picture ******! You stated it was gold over red? That's an interesting combo that I haven't seen yet. I'd love to see a pic of it!

-Darwin
Yeah, I was going to take some this weekend, but we had some snow that hid everything. I'll document the move from his driveway to mine.
Old 01-23-2007, 10:02 PM
  #43  
Shark_gts
Racer
 
Shark_gts's Avatar
 
Join Date: Nov 2002
Location: Sproat Lake
Posts: 366
Likes: 0
Received 0 Likes on 0 Posts
Default

We recently did up two cars that sat.

Aside from everything else expect fuel issues. Stuck, leaking or block injectors, corrosion in the fuel system and tons of varnish. It can be nasty. Also the brakes corrode internally because the water in the fluid will just sit there and attack.

If the coolant was way over the age spec when she stopped running, then water pump corrosion, cooling system and engine damage (head gaskets) may also result.

These guys are right - the car is potentially a ton of work and should be very low $$ as a result.
Old 01-26-2007, 01:47 PM
  #44  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Shark_gts
We recently did up two cars that sat.

Aside from everything else expect fuel issues. Stuck, leaking or block injectors, corrosion in the fuel system and tons of varnish.
What did you have to do to fix the problems?
Old 01-26-2007, 07:58 PM
  #45  
teamking
Pro
Thread Starter
 
teamking's Avatar
 
Join Date: Jun 2006
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

OK, trying to add some pictures...
Attached Images      


Quick Reply: My saga begins: I'm getting my neighbor's 944 Turbo



All times are GMT -3. The time now is 10:15 PM.