Eyal 951

I have a couple sets of 944S (16v) pistons, and a few more 944 NA pistons, early and late. Non are the high compression 88+ - $20 each, $70 for a set

I have 2 sets of 16v Hydraulic lifters, and one set of the 8v lifters. The 16v lifters don't have much use on them at all. The 8v lifters are used. - $149 set 16v lifters, $119 set 8v lifters

I have two cam gear covers for a 16v car, one PC'ed red, one unpainted. $25 each

Box full of what seems to be slightly used engine bearings. Not sure if anyone has a use for these, but allll of it for $25

I have 968 exhaust manifold. - $199

968 cat pipe - $179

968 space saver - $49

944 NA oil pan - $39

I have some other stuff too, PM me if you need anything.

Photos:

Eyal 951

more...

Eyal 951

I'll trade stuff for an 86 switch stalk behind the steering wheel, or I'll buy one. I need a NON airbag one.

mark944turbo

Do you have any info on the 944S pistons like what tolerance group they are or what they currently measure? It seems you took pics of them in the unimportant areas, take some of the skirts, I am definately interested in a set. How many miles and what is the story?

Eyal 951

Mark, I have 3 sets, and will be happy to take specific photos. I just wanted the have general pics of what I have, and get something more specific for anyone interested. Let me know what angles you want. Looks like most of them are tolerance group 1. I have 3 that say tolerance group 0, if thats the group you want, i'll look through the rest to see if i have a 4th.

mark944turbo

I would like pictures of the skirts on the 4 best ones you have. I want to make sure the factory iron plating is not worn through yet. Where did they come from?

Eyal 951

i bought a lot of parts from someone who has a couple 944/968 race cars. A lot of the parts have sat for a long time, and have little mileage on them. I'll get those photos now.

Eyal 951

944 S set, better views. If you (or anyone wants) I'll drop the price the more you buy since i do want to move these. I'll do 120 for 2 sets.

Eyal 951

mark, let me know if you would like the set of S pistons.

michaelathome

Eyal, you should post this in the 928 forum as well. I am pretty sure that a lot of this stuff may match 928 parts but I would make sure before posting. As an example two sets of 16v lifters should work as a lifter set for a 32v S4. Again not sure but worth a shot.

Michael

Eyal 951

Back from madison, so bump!

armandodiaz

Do you have any 8valve connecting rods? Specifically for an 87

Eyal 951

I only have a single con rod at the moment. It came from a 944 S, but I think thats the same as all the other con rods.