Before I post it on e (evil)-bay
#1
Drifting
Thread Starter
Join Date: Jul 2002
Location: goodlettsville,tn
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have sold a lot of the parts off of the 86 951 that I'm currently parting, but I still have the engine. I have priced it to a couple of you guys, but no takers on it. I have another car coming, so I need to get the 951 finished and out of the garage.
The engine only has 75k miles on it. It has a recent front-end rebuild (500 miles) and a new clutch will be included. This is a complete engine with the exhaust mainfold, throttle body, intake, fuel rail and injectors. The only thing you will have to do is put your air meter, air-con compressor, and alternator on, and it will be ready to go.
I can provide the name, phone # and address of the previous owner and the tech who serviced it.
Right before the car was wrecked, the tech did a complete check-up on the engine including a compression check. The compression was perfect on all 4 cyl. No leak down test was needed.
I also still have the intercooler and several other pieces from the 951 plus parts from 5 other cars.
Who ever buys the engine, I will include all of the plumbing that goes with it.
The engine only has 75k miles on it. It has a recent front-end rebuild (500 miles) and a new clutch will be included. This is a complete engine with the exhaust mainfold, throttle body, intake, fuel rail and injectors. The only thing you will have to do is put your air meter, air-con compressor, and alternator on, and it will be ready to go.
I can provide the name, phone # and address of the previous owner and the tech who serviced it.
Right before the car was wrecked, the tech did a complete check-up on the engine including a compression check. The compression was perfect on all 4 cyl. No leak down test was needed.
I also still have the intercooler and several other pieces from the 951 plus parts from 5 other cars.
Who ever buys the engine, I will include all of the plumbing that goes with it.
#6
Nerd Herder
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by tod84944
If someone wants to do a conversion....... I just happen to have all of the stuff!!!
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
Trending Topics
#12
Drifting
Thread Starter
Join Date: Jul 2002
Location: goodlettsville,tn
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Shipping to CA would not be no where as bad as you would think. I recently shipped a 951 engine without the head, but the cross over pipe was still on it, to Brumos Porsche in FL and it was only 130.00. If I sell it for close to what I would like to have for it, I will cover most of the shipping.
#14
Drifting
Thread Starter
Join Date: Jul 2002
Location: goodlettsville,tn
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Rock,
You are not that far away. I could meet you halfway. Send me some pics of the car.
toddandcharity@peoplepc.com
I hope you are serious about this, because I am.
You are not that far away. I could meet you halfway. Send me some pics of the car.
toddandcharity@peoplepc.com
I hope you are serious about this, because I am.