951 turbo part numbers
10-03-2004, 10:37 PM
#1
Advanced
Thread Starter
Join Date: Mar 2004
Location: california
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
951 turbo part numbers
does anyone have the part numbers for the 90 degree hose
that is attached to the cutoff valve and air boot for a 1986 951?
i cannot find a number on it and it is starting to crack badly
and will soon fall apart.
does anyone know where i can purchase some of these pre-formed
hoses for this 951?
i have searched alot of online part stores but without part numbers
of some of these hoses it seems impossible.
i have looked in the factory manuals and it shows cutoff valve and hoses
but no numbers.
some of these hoses get baked under the hood of this car.
any help is greatly appreciated.
thank you,
rolf morrow
that is attached to the cutoff valve and air boot for a 1986 951?
i cannot find a number on it and it is starting to crack badly
and will soon fall apart.
does anyone know where i can purchase some of these pre-formed
hoses for this 951?
i have searched alot of online part stores but without part numbers
of some of these hoses it seems impossible.
i have looked in the factory manuals and it shows cutoff valve and hoses
but no numbers.
some of these hoses get baked under the hood of this car.
any help is greatly appreciated.
thank you,
rolf morrow
10-03-2004, 10:51 PM
#2
Addict
Rennlist Member
Rennlist Member
www.paragon-products.com
www.sunsetporsche.com
Most anything for your car can be bought from these folks, Paragon is a Rennlist sponsor
www.sunsetporsche.com
Most anything for your car can be bought from these folks, Paragon is a Rennlist sponsor
10-03-2004, 11:23 PM
#4
Advanced
Thread Starter
Join Date: Mar 2004
Location: california
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
951 hose part numbers
sorry about that, i will try to be more specific.
the hose is approximately 3-4" x 3/4" diameter is connected
to the bypass air valve,(also known as boost/cutoff valve ,at least what i have heard it called ) which is attached to the large air boot
after the air flow sensor.
also hoses that are connected to the charging air guide pipe
are old, i have factory manuals with good pictures but no part numbers
for the pre-formed hoses.
it makes it difficult to order and replace.
thanks,
rolf morrow
the hose is approximately 3-4" x 3/4" diameter is connected
to the bypass air valve,(also known as boost/cutoff valve ,at least what i have heard it called ) which is attached to the large air boot
after the air flow sensor.
also hoses that are connected to the charging air guide pipe
are old, i have factory manuals with good pictures but no part numbers
for the pre-formed hoses.
it makes it difficult to order and replace.
thanks,
rolf morrow
10-03-2004, 11:48 PM
#6
Advanced
Thread Starter
Join Date: Mar 2004
Location: california
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
EXACTLY!
thank you Rob, i have been looking for a diagram,picture,charcoal sketch,i didn't care.
the parts numbers included are more than i expected, i know i may sound like a geek,
but i love my 951 and it really helps to have the right information when trying to keep it running
great. the rennlist has helped me again and with extreme speed.
i really appreciate your help.
thank you,
rolf morrow
1986 951
1983 944
thank you Rob, i have been looking for a diagram,picture,charcoal sketch,i didn't care.
the parts numbers included are more than i expected, i know i may sound like a geek,
but i love my 951 and it really helps to have the right information when trying to keep it running
great. the rennlist has helped me again and with extreme speed.
i really appreciate your help.
thank you,
rolf morrow
1986 951
1983 944
Trending Topics
10-04-2004, 12:27 AM
#8
Advanced
Thread Starter
Join Date: Mar 2004
Location: california
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
2tight,
i didn't think there were any locals on this 951 list, i rarely see any on the road on 80 or 50.
looks like #23 on your diagram,where can i get a book or download
that has all of those including part numbers? i have a parts and technical reference catalog,
which has a lot of information, but not what both you and rob both attached to this post.
thanks,
rolf morrow
1986 951
1983 944
i didn't think there were any locals on this 951 list, i rarely see any on the road on 80 or 50.
looks like #23 on your diagram,where can i get a book or download
that has all of those including part numbers? i have a parts and technical reference catalog,
which has a lot of information, but not what both you and rob both attached to this post.
thanks,
rolf morrow
1986 951
1983 944
10-04-2004, 01:30 AM
#9
Hey Man
Rennlist Member
Rennlist Member
Rolf,
There's not too many local 951'ers who post frequently but I link up with at least 3 others in town. We had a great run last weekend, seven cars, on the Wentworth Springs/Ice House Loop. Where are you in town? From your sig it looks like we have the same taste in cars! As far as the parts drawings go, shoot me an email and I'll explain why it's best not discuss that program on the forums.
BTW, I'm in Elk Grove.
Steve
There's not too many local 951'ers who post frequently but I link up with at least 3 others in town. We had a great run last weekend, seven cars, on the Wentworth Springs/Ice House Loop. Where are you in town? From your sig it looks like we have the same taste in cars! As far as the parts drawings go, shoot me an email and I'll explain why it's best not discuss that program on the forums.
BTW, I'm in Elk Grove.
Steve
10-04-2004, 10:52 PM
#10
Advanced
Thread Starter
Join Date: Mar 2004
Location: california
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
steve,
i am in folsom area.
i have not been up ice house road with porsche,but have taken 951 up to south shore.
let me know how to pm and let me know about do's and don'ts on forum.
my 951 is not quite ready for any runs yet,maybe by spring 2005.
thanks again,
rolf morrow
1986 951
1983 944
i am in folsom area.
i have not been up ice house road with porsche,but have taken 951 up to south shore.
let me know how to pm and let me know about do's and don'ts on forum.
my 951 is not quite ready for any runs yet,maybe by spring 2005.
thanks again,
rolf morrow
1986 951
1983 944