Matt O.

Hey guys, anyone want these? These are my wheels and if you purchase them I will give you a special Rennlist discount.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT

X 944 X

what would i need to get them to fit my 83 NA?

Chris_924s

spacers.. You'll be going from early to late offset.

Matt- too bad they arent all 4 6"ers.. I'd snap em up. The 7" poses a width problem on the 924S.. What else you got in late offset??

Yabo

they dont work without spacers on 85.5 rihgt? grr

ErichCS

Chris - You can run those widths on your 924S. I am going to be running a 16x7 phone dial up front and 16x8 in the back on mine. Many guys run that size, those width wheels are fine for the 924S. Even the tires should work!

Whats your concern exactly?

Later Guys!
Erich

Chris_924s

I am running stock suspension and the 245's I would want to mount in the rear would result in rear fender rubbing. Maybe perfect for a track day..

Besides, I prefer to rotate my tires for wear purposes so all four corners would be the same rim/tire size.

ErichCS

Ok, all i was saying was that these wheels would fit perfectly on a 924S due to their width and offset!

Matt Good Luck selling them! Two sets of wheels is my limit!
-Erich

hacker-pschorr

What are the offsets?

pete944

I think Boxster wheels are ET55.

Matt O.

These would fit on a 924S AFAIK. Both years. The 924S has the same offset IIRC as the late 944.

I hope these go to a good Rennlister's home.

-Matt

Matt H

Chris - it will be virtually impossible to mount a 245 on a 6" wheel no matter the offset. If that is your concern and you like them then buy them because you are going to find it almost impossible to mount the 245 on the 7" wheel as well.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote