Red1

I won't know what my schedule is until Sunday morning, but if you guys are meeting somewhere I'll definitely try to make it.

I'd volunteer to host w/beer and burgers, but I just don't know when I'll be free Sunday.

If you want to wrench, we have the parts to do Kevin's ball joints and fuel lines. Mike should do one fuel line that we looked at last weekend. Other that that the only thing I know needed done is Kevin's motor mounts, but I don't think he's got the parts yet.

If you just want to hang out somewhere, the Mazda bit at Gulf Greyhound Park might be something cool to do.

mikl1976

havent ordered the line yet.. probably will next weekend though maybe also the shocks too.. but dont know yet about them..

rruminson

I have this problem occasionally. Originally usually happened when car got hot. Wouldn't start until it had cooled down. Don't know if this is the same problem, but it seems to hit in intervals. Now I can start it and just drive down the block and sometimes it won't start. Most of the time though, no problem whether hot or cold. Incidently are you speaking of the ground at the rear of the fuel rails on attaching behind the valve cover or a different one? Anyone ever have this problem with their starter? Mine sometimes will kick over and almost stop like the battery is dead. If I try again usually cranks up no problem. Never happens very often though. Just wondering if this might be related.

g5nad

1. Change out the ring gear speed sensor, the speed sensor which is closest to the back of the car.
2. Clean the ground contacts which are located under the heater valve.

Can anyone post a picture ?