"FS" nearly free 8v 944 cylinder head for experiments?
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
"FS" nearly free 8v 944 cylinder head for experiments?
Last year I disassembled my engine and put it into boxes and didn't look at anything until very recently.
Turns out the coolant was overdue for changing and became corrosive and ate away at a lot of the cylinder head aluminum (all the ports on the underside are noticeably enlarged vs a standard head, and some corrosion is crawling towards one combustion chamber).
So basically this head isn't any good anymore...so I'm offering it to anybody for scrap price which I imagine is under $10.
You can use it as practice for porting, cut it apart as a science project, use it as a door stop, dunno. But it's no good to me.
It will be just the aluminum casting - I'm going to have the valves/springs removed.
Located in Nashville, TN...I'll let this sit for a few weeks, if no interest It goes to the scrapper.
Turns out the coolant was overdue for changing and became corrosive and ate away at a lot of the cylinder head aluminum (all the ports on the underside are noticeably enlarged vs a standard head, and some corrosion is crawling towards one combustion chamber).
So basically this head isn't any good anymore...so I'm offering it to anybody for scrap price which I imagine is under $10.
You can use it as practice for porting, cut it apart as a science project, use it as a door stop, dunno. But it's no good to me.
It will be just the aluminum casting - I'm going to have the valves/springs removed.
Located in Nashville, TN...I'll let this sit for a few weeks, if no interest It goes to the scrapper.