944S Modification
#1
944S Modification
Hey guys quick question I was wondering on the 944S is it possible to reach the 200-210Bhp mark? I figure with the motor at 187bhp the 200bhp mark is reachable but not sure. I was thinking of these ideas.
1) Exhaust- More For Fun Than Gains
2) MAF Conversion Or Stand Alone
3) S2 Intake- 968 Too Much For 2.5 26v?
4) Cam Woodroof Key- 4 Degree Advance
Any thoughts or idea appreciated. Thanks!
1) Exhaust- More For Fun Than Gains
2) MAF Conversion Or Stand Alone
3) S2 Intake- 968 Too Much For 2.5 26v?
4) Cam Woodroof Key- 4 Degree Advance
Any thoughts or idea appreciated. Thanks!
#2
MAF conversion on its own will get you there, a little bit of tuning will help better.
944S really needs hotter camshafts though - they are very mild, even for a 4v head.
Could try advancing the cams but I've not heard of anybody doing it on a 4v (even though I plan to give it a shot when I get my 4v engine running).
944S really needs hotter camshafts though - they are very mild, even for a 4v head.
Could try advancing the cams but I've not heard of anybody doing it on a 4v (even though I plan to give it a shot when I get my 4v engine running).
#3
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: May 2001
Posts: 12,269
Likes: 266
From: Hotlanta - NE of the Perimeter
According to lore, the S cams leave a lot to be desired, but better than the S2 cams.
From a previous discussion regarding S/S2 cams, if you're interested-
http://www.catcams.com/engines/camshaft-setup.aspx
From a previous discussion regarding S/S2 cams, if you're interested-
http://www.catcams.com/engines/camshaft-setup.aspx