Spring cleaning garage sale
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
Spring cleaning garage sale
Cleaning the garage and want to offload these things.
Pickup available or can ship if needed for added cost.
Take everything (all parts including cylinder head) for $150.
2 sets (maybe a few missing though) of 16-valve 944 lifters/cam followers. Used original, some marks on them, Free.
3x 85.5+ (6-rib) Crank pulley+balance shaft drive gear, $10 each.
(Not pictured) 85.5 NA cylinder head, valves, springs, needs to be machined and reassembled. $100.
Pickup available or can ship if needed for added cost.
Take everything (all parts including cylinder head) for $150.
2 sets (maybe a few missing though) of 16-valve 944 lifters/cam followers. Used original, some marks on them, Free.
3x 85.5+ (6-rib) Crank pulley+balance shaft drive gear, $10 each.
(Not pictured) 85.5 NA cylinder head, valves, springs, needs to be machined and reassembled. $100.
Last edited by V2Rocket; 10-11-2019 at 01:31 PM.
Trending Topics
#10
Drifting
Is the 45 degree elbow silicone, are the dimensions 3 1/4 " ID with 6" legs as measured at the 45 degree intersection? Please provide info and then can make an appropriate offer.
Do not need the MAF transition piece.
Thank you,
Tom
Last edited by T&T Racing; 06-04-2019 at 07:31 PM.
#11
Rainman
Rennlist Member
Rennlist Member
Thread Starter
its just under 3" ID (makes for a nice tight seal on a 3" pipe), and the legs are more like 5.5" on the long side and 3.5" on the short side radius, from the end to the middle of the bend.
#12
Race Car
#13
Rainman
Rennlist Member
Rennlist Member
Thread Starter
T, had interview out there last Friday that I think went well.
Have a follow up phone call with a VP next week, fingers crossed, this could be happening finally
In the meantime my house in CA has been listed for sale so I'm trying to thin the herd of extra junk to minimize packing.
Have a follow up phone call with a VP next week, fingers crossed, this could be happening finally
In the meantime my house in CA has been listed for sale so I'm trying to thin the herd of extra junk to minimize packing.