New "surroundings".....Ruby gets a new race seat
#16
Rennlist Member
Thread Starter
A bit over a grand for the seat, brackets and slider. There's a recession on, so I conceded to my wife and just bought the one seat for now. HOWEVER...the mis-match will probably drive me to action soon. I'm gonna post pics in a minute.
#17
Rennlist Member
Thread Starter
Well, this was a fairly painless project. I didn't want to cut the seat beds out, as I would like to keep the car as stock as possible, in case I ever want to go Concours..........yeah, right!
At any rate, the B-K side brackets were custom tailored to this seat and this car, they in turn bolt to the Recaro dual sliders which bolted to the bed rails. All the accessories came with new hardware, so no trips to the hardware store.
I took out the rest of the sound deadening behind the DME box. It only took about 20 minutes with a good scraper. Then a wire brush on the drill, then some POR-15 Chassis Black last night.
At any rate, the B-K side brackets were custom tailored to this seat and this car, they in turn bolt to the Recaro dual sliders which bolted to the bed rails. All the accessories came with new hardware, so no trips to the hardware store.
I took out the rest of the sound deadening behind the DME box. It only took about 20 minutes with a good scraper. Then a wire brush on the drill, then some POR-15 Chassis Black last night.
#19
Rennlist Member
Thread Starter
And the finished product. Maybe a 1/2" higher under my butt, and a bit higher, but more support under my thighs...a better position, IMO. The seat back is taller than the SRD, and I've got white and red logos, so not a great match, which will probably gnaw at me.
If you look at the last pic, you'll see I had a big Momo filler cushion on the old seat, which I don't need now. The seat feels great. I've got a NOS Recaro pneumatic lumbar support that I'll pull out of the old and put in this seat, and I'm good to go. Let's call this a wrap!
If you look at the last pic, you'll see I had a big Momo filler cushion on the old seat, which I don't need now. The seat feels great. I've got a NOS Recaro pneumatic lumbar support that I'll pull out of the old and put in this seat, and I'm good to go. Let's call this a wrap!
#26
I haddah Google dat
Rennlist Member
Rennlist Member
Ed, I think the "mismatch" of the seats is very purposeful looking. I like the look because it accentuates the driver and sends a subtle message of form following function.
#27
Drifting
Hey Ed,
Do you still have the SPG XL in Ruby?
Do you think that two will fit in her OK?
Also, when you are on a long drive, it it a comfortable seat?
I want two for my car but my wife says that they wouldn't be comfortable enough.
What do you think??
Do you still have the SPG XL in Ruby?
Do you think that two will fit in her OK?
Also, when you are on a long drive, it it a comfortable seat?
I want two for my car but my wife says that they wouldn't be comfortable enough.
What do you think??
#28
Rennlist Member
Thread Starter
I do, and 2 would fit. It is very comfortable, but I suppose that is subjective. There are enough accessory pads to go with them, that I think anyone would line them. You'd only give up the reclining feature.
#29
Race Car
I'm not sure I've followed this older thread. Ed, did you have 2 matching Sparco seats and (at the time) replace just the driver's(as this thread goes)?
I guess my question is, at the present time, have you replaced the pass. seat with a Recaro? and, Do you have two matching Sparco seats laying around you may want out of your way?
I guess my question is, at the present time, have you replaced the pass. seat with a Recaro? and, Do you have two matching Sparco seats laying around you may want out of your way?
#30
Rennlist Member
Thread Starter
I've got a Recaro Speed/SRD in the passenger side still. I've been toyimg with changing that seat too. I'd have a set for sale if I do this.