Anyone know about this type of wing?
#16
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by psychoideas
Specifically I’d like to know the dimensions of it.
Width not counting the end bits, Thickness top to bottom at its thickest, Length front to back (chord)
I had a look over on the 997 GT3 forums but I’m too scared to go there![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
Width not counting the end bits, Thickness top to bottom at its thickest, Length front to back (chord)
I had a look over on the 997 GT3 forums but I’m too scared to go there
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
width: 1450
chord: 370
thichkess:?
endplates:
roughhly 400 x 120 (not exactly rectangular)
note: 997 rs wing is wider and endplates different
#17
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
JV,
That'a great,
You don't happen to have a pic of this one do you?
370mm Chord is huge!
is it like this?
That'a great,
You don't happen to have a pic of this one do you?
370mm Chord is huge!
is it like this?
Last edited by psychoideas; 08-27-2007 at 04:33 AM.
#18
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by psychoideas
JV,
is it like this?
is it like this?
heres a good view of an rs:
#25
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by JackOlsen
14.5 inches?
JV,
I know this is a big ask and I'm not in any hurry, but,........................next time you're there can you lay a book (or something soft) over, it front to rear, and tell me the depth of the depression.
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
(not the depths that I fall into after looking at these beautiful pics and then going into my shed and seeing my tired, old baby)
Hey what about a dressmakers tape (material) layed in it for a front to back length on the top and then a bottom as well?
I'll get this aerofoil shape worked out sooner or later
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#28
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey JV,
Did you get a chance to have a look at that wing??
I've started tooling up. I've got a hot wire cutter ready and a very large block of foam. 400 x 1500 x 100.
I found a aerofoil program and I've scaled it down from your previous measurements to fit the SC body correctly. This program will print out a life size template for the cutter.
So far I've got 357mm chord, 13.165% thickness and a 10% camber.
I'm going to use epoxy and lay it up with 3 layers of woven fibreglass and 2 layers of Carbon Fibre twill. I'll hang it leading edge up and cover the whole thing with Mylar so it ends up with a gloss skin on it like the original.
I have equipment here to vacuum bag and oven cure small parts but this wing won't fit in them!!
Here's to wishfull thinking
Did you get a chance to have a look at that wing??
I've started tooling up. I've got a hot wire cutter ready and a very large block of foam. 400 x 1500 x 100.
I found a aerofoil program and I've scaled it down from your previous measurements to fit the SC body correctly. This program will print out a life size template for the cutter.
So far I've got 357mm chord, 13.165% thickness and a 10% camber.
I'm going to use epoxy and lay it up with 3 layers of woven fibreglass and 2 layers of Carbon Fibre twill. I'll hang it leading edge up and cover the whole thing with Mylar so it ends up with a gloss skin on it like the original.
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
I have equipment here to vacuum bag and oven cure small parts but this wing won't fit in them!!
![nono](https://rennlist.com/forums/graemlins/nono.gif)
Here's to wishfull thinking
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
#30
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
JV,
No autoclave, just oven, and a basic thing at that.
I'm sorry but I haven't progressed with the RS door panels yet, like everyone, been busy. The wife's got me working on the house. Too many projects, only one me.
I wish my brother had one!
Do you get to drive it?
No autoclave, just oven, and a basic thing at that.
I'm sorry but I haven't progressed with the RS door panels yet, like everyone, been busy. The wife's got me working on the house. Too many projects, only one me.
I wish my brother had one!
Do you get to drive it?
![burnout](https://rennlist.com/forums/graemlins/burnout.gif)