Dundon over axle pipes
#31
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Woah, dont drag us into this Our link pipes are Titanium (Asnex) and also come complete with heat shielding. The material we use is literally 5x more expensive, takes roughly 20-25% longer to fabricate / weld thanks to the material qualities and additional care that needs to be taken over the environment in which they're welded in. Also, the heat shielding alone accounts for well over 1/3 of the overall price.
The Akrapovic parts are fantastic value for what they are, a loss leader to help their other Porsche sales, huge companies often do this. Compare the price of the titanium heat shielded link pipes with their rear silencer replacement, it simply doesn't stack up when you consider the amount of material in their rear. The Akra link pipes are closer to stock diameter so not really suitable for those chasing the big power gains but for those looking for a simple cost effective increase in sound they're great!
As our name was mentioned so I felt it right to respond and address as I would hate for our parts to be looked at in the same light. Our pricing is consistent across all of our products, our margins are smaller than anyone else's out there and I do believe that they offer excellent VFM with all things considered.
JC
The Akrapovic parts are fantastic value for what they are, a loss leader to help their other Porsche sales, huge companies often do this. Compare the price of the titanium heat shielded link pipes with their rear silencer replacement, it simply doesn't stack up when you consider the amount of material in their rear. The Akra link pipes are closer to stock diameter so not really suitable for those chasing the big power gains but for those looking for a simple cost effective increase in sound they're great!
As our name was mentioned so I felt it right to respond and address as I would hate for our parts to be looked at in the same light. Our pricing is consistent across all of our products, our margins are smaller than anyone else's out there and I do believe that they offer excellent VFM with all things considered.
JC
__________________
WE'RE NO LONGER ACTIVE ON THE RENNLIST FORUMS - FOR ALL ENQUIRIES PLEASE CONTACT US VIA THE JCR WEBSITE BELOW
/ / / JCR PORSCHE \ \ \
contact@jcr-developments.com
Facebook | Instagram | Youtube
/ / / JCR PORSCHE \ \ \
contact@jcr-developments.com
Facebook | Instagram | Youtube
The following 4 users liked this post by JCR-Porsche:
#32
Three Wheelin'
And Johnny is fighting the weak dollar against the British pound.
The following users liked this post:
Alpha Ice (10-10-2021)
#33
RL Community Team
Rennlist Member
Rennlist Member
The following users liked this post:
UncleDude (10-09-2021)
#34
Rennlist Member
some thread on RL is trying to do a group buy of Quick Silver OAPs for under $1,000. Titanium and Inconel notwithstanding... the manufacturing costs and thus the wholesale price of the average SS OAP has gotta be under $1,000/pair. Its an exhaust pipe dammit! I know for a fact what the landed cost of the Kline OAP and Rear in inconel is (I wont say how much or how I know...) but the SS version (OAP and Rear Box) has got to be well under $3k.
#35
I think that the Akra link-pipes have to be without a doubt the leader in value here, lightweight Titanium, shielded and during the group buy only a little more than 1/3 the price of the Dundon version shown in post #1
Hat's off to Eric @SupremePower for making it all happen!
Hat's off to Eric @SupremePower for making it all happen!
.
#36
Rennlist Member
They’re going to have to get the same people that review “audiophile” speaker cables to test these things.
”Yes, the Dundon OAPs are very expensive, but the soundstage is brighter and airier, the tonality fuller and more profound than the lesser options...it is as if the pistons are right next to your head.”
”Yes, the Dundon OAPs are very expensive, but the soundstage is brighter and airier, the tonality fuller and more profound than the lesser options...it is as if the pistons are right next to your head.”
Ive heard that if you get a green marker pen and scribble on either end of the OAP that its good for an additional +10bhp ... or is that a CD???
The following users liked this post:
colnagoG60 (10-10-2021)
#37
Rennlist Member
The tech working on my car has nothing but positive comments on the fit, finish and ease of installation. And Dundon delivers on power.
Last edited by Alan C.; 10-12-2021 at 10:16 PM.
#38
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
I’ve had Dundon headers on my 981 GT4, 991.1 GT3 and 991.2 GT3. Dundon uses T321 stainless on all of their stainless products. When my 718 GT4 shows up it will get Dundon headers. In the highly unlikely event I don’t like the headers Dundon will take them back no questions asked.
The tech working on my car has nothing but positive comments on the fit, finish and ease of installation. And Dundon delivers on power.
The tech working on my car has nothing but positive comments on the fit, finish and ease of installation. And Dundon delivers on power.
The following users liked this post:
Alpha Ice (10-13-2021)
#39
Rennlist Member
True, sound is a personal thing. Dundon will refund your money if you don’t like the sound. I don’t believe any of the other vendors will do that.
#40
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,535
Likes: 0
Received 3,460 Likes
on
2,361 Posts
The following users liked this post:
Soul Performance (10-13-2021)
#41
Burning Brakes
I'm with you Bob, sound is very personal, and we all hear drone differently. I prefer a less raspy sound that has a bit more growl and low end sound. Something like the Fabspeed in my previous car. With the new one, I'm loving the inconel options and sounds they offer. If given the chance to spend the same amount of money between them...I'll pick inconel / JCR all day long (sorry to drag you into this Jonny ). But it is personal preference.