When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know its 22 as well, I hadn't seen if anyone had fitted the centre ones (and whether the fixings were already there/had any benefit for us) and someone was also asking for those part numbers which again, hadn't seen anyone else post up.
I know its 22 as well, I hadn't seen if anyone had fitted the centre ones (and whether the fixings were already there/had any benefit for us) and someone was also asking for those part numbers which again, hadn't seen anyone else post up.
Everything is there and all the pieces come together as a kit. I can't really say if it helps or not.
You’ll have to cut the underfloor and add the attachment fixings. Not sure if there is a template for the proper placement
27 is not in the 718 MR kit (and I probably won’t bother to add them tbh), But is a standard part for 991.2 GT3 & 2/3RS and 718 RS… if you don’t have FAL these parts may well take hammering in particular IMV, but should further aid cleaning up that underbody air flow allowing the rear diffuser to be more efficient and effective.
You’ll have to cut the underfloor and add the attachment fixings. Not sure if there is a template for the proper placement
27 is not in the 718 MR kit (and I probably won’t bother to add them tbh), But is a standard part for 991.2 GT3 & 2/3RS and 718 RS… if you don’t have FAL these parts may well take hammering in particular IMV, but should further aid cleaning up that underbody air flow allowing the rear diffuser to be more efficient and effective.
I would have sworn mine came with both and they bolted right up. I'm going to have to get under my car and look.
So finally got home and looked under my car, and I do not have part #27. Would have sworn I did. It's only $90 so I ordered them and will see what it takes to install them. Sorry for any misinformation.
So finally got home and looked under my car, and I do not have part #27. Would have sworn I did. It's only $90 so I ordered them and will see what it takes to install them. Sorry for any misinformation.
Interested to see this when you get them/installed. Update us here if you can when you get it sorted.
Famous last words "it doesn't look like it will be that bad"
We've all been victim to the several-hour, "45 minute" projects a time or two hehe! Great picture! that shows a lot. Thanks! What year is your car? Interested to see if there were already pre-drilled provisions for these? Mine is a '22 GT4 that I would be installing them on.
We've all been victim to the several-hour, "45 minute" projects a time or two hehe! Great picture! that shows a lot. Thanks! What year is your car? Interested to see if there were already pre-drilled provisions for these? Mine is a '22 GT4 that I would be installing them on.
hey folks, anyone can look up or have replaced the highlighted underbody aero bits on our cars in this image? Mine is a bit beaten up from sending it too hard on track. Thanks in advance!
I have an [early] MY21 also. Were there any indentations or the like to help with placement?
seems that these can be positioned fairly easily based on the outbound vanes. But preinstalled mounting points would be handy.
I don't know. Haven't had a chance to get under there and look. That picture is from a friend of mines GT4RS. I'll probably get a chance this weekend. Got some work I need to do on the car, so I was planning on putting it up on the lift.