Akrapovic Aftermarket Exhaust
#31
Rennlist Member
I’d be curious to see some temp sensor readings on unshielded vs shielded vs unshielded with some quality exhaust wrap.
I do like the OPF pipes with the bracketry though for sure. You can see from the rear go pro shots that the whole system gets torqued under load (you see the stress and release at the upshift points) and breaking up the stress into smaller stretches can’t be a bad approach.
I do like the OPF pipes with the bracketry though for sure. You can see from the rear go pro shots that the whole system gets torqued under load (you see the stress and release at the upshift points) and breaking up the stress into smaller stretches can’t be a bad approach.
#32
Intermediate
Thread Starter
The black plastic parts are my only disappointment in terms of looks and quality with the car. It looks and feels cheap.
Last edited by CZ718GT4; 08-21-2020 at 04:38 AM. Reason: spelling
#33
I have their upgraded exhaust system on my S6. Very pleased with the sound, and she's a meaty gal so any weight relief is a bonus...
#34
If you look from the rear, there's no other black plastic parts, so I think it would elevate the whole perception of the car from that angle. The front lip would be more or less impossible to make CF as it would just be scraped.
The black plastic parts are my only disappointment in terms of looks and quality with the car. It looks and feels cheap.
The black plastic parts are my only disappointment in terms of looks and quality with the car. It looks and feels cheap.
#35
If you look from the rear, there's no other black plastic parts, so I think it would elevate the whole perception of the car from that angle. The front lip would be more or less impossible to make CF as it would just be scraped.
The black plastic parts are my only disappointment in terms of looks and quality with the car. It looks and feels cheap.
The black plastic parts are my only disappointment in terms of looks and quality with the car. It looks and feels cheap.
The following users liked this post:
tdlondon (08-21-2020)
#37
I love Akra stuff. Both the corporate and Tag sites linked above, however, state that Akra GT4/Spyder exhausts are for off-road use only. I’m not sure whether this means that they have not yet been tested for compliance in the many markets they sell in, or whether they know already that they will not comply. Unfortunately, I live in California, which means that compliance is absolutely necessary. Per my limited understanding of exhaust technology, a cat-back system ought not affect emissions. By stating that the exhaust is for off-road use are they implying that it may not meet sound standards in some markets?
Last edited by GT3ED; 08-24-2020 at 10:49 PM.
#38
I love Akra stuff. Both the corporate and Tag sites linked above, however, state that Akra GT4/Spyder exhausts are for off-road use only. I’m not sure whether this means that they have not yet been tested for compliance in the many markets they sell in, or whether they know already that they will not comply. Unfortunately, I live in California, which means that compliance is absolutely necessary. Per my limited understanding of exhaust technology, a cat-back system ought not affect emissions. By stating that the exhaust is for off-road use are they implying that it may not meet sound standards in some markets?
I’ve had aftermarket exhausts in CA for a long time and not once I had an inspector complain about a visual issue, as long as the emissions readings are good.
The following 3 users liked this post by tdlondon:
#39
#40
#41
This doesn't quite make sense. If the slip-on exhaust can fit with the OEM pipes, then how can the Akra pipes not have an OEM spec connection. Unless, you have to buy everything??
The following users liked this post:
blackholescion (08-26-2020)
#42
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Join Date: Jul 2015
Location: 2845 S.W. 69th CT. Miami, Fl. 33155
Posts: 3,087
Received 963 Likes
on
483 Posts
We don't understand how that could be either. We reckon that the Akra link pipes will in fact pair with the OEM muffler just fine. We have the 1st unit making it's way to the U.S. on order so when it arrives we'll see what's what and confirm for everyone.
__________________
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
The following 4 users liked this post by WheelsB:
#43
#45
Burning Brakes
Spyder/GT4 are mechanically identical, just like the 2 GTS 4.0 cars.
Last edited by iliveoncaffiene; 08-27-2020 at 09:41 AM.