718 / 982 Boxster & Cayman OEM Front Lip Spoiler Solution Now Available
#46
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Update - the first version of the new vent attachments are ready. More info to follow soon,
__________________
Visit us online https://emc2design.com
By Porsche enthusiasts
Visit us online https://emc2design.com
By Porsche enthusiasts
For Porsche enthusiasts
The following 2 users liked this post by Emc2design:
David Borden (05-21-2020),
InTgr8r (05-17-2020)
#47
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Ready for final testing...
The following users liked this post:
InTgr8r (05-20-2020)
#48
That was some fast development work, great customer responsiveness to feedback. I like the more gradual transition with the revised kit, good job!
#50
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
First install pics starting to come through with thanks to @Red991S . Will post more soon.
The following users liked this post:
Yamino (06-07-2020)
#52
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
#53
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
For those requesting a frontal shot:
#55
@Emc2design - Do you have a kit for the GTS yet? I just checked the website, and didn't see anything.
#56
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
@Emc2design - Do you have a kit for the GTS yet? I just checked the website, and didn't see anything.
Thanks for checking in
We tried very hard to find a solution for the GTS using both the 991.1 and the 991.2 spoiler (the 991.2 spoiler is about 8 inches wider than the .1 and while it may seem unbelievable, it is still several inches too short for a workable solution on the GTS bumper due to the existing spoiler mounting cavity design)
On the non GTS bumper because there is no existing cutout/cavity we were able to mount the spoiler on the underside and make 2 different end-cap solutions to finish off the sides of the spoiler nicely, but the GTS simply won't allow for a workable (structurally and aesthetically) solution.
Sorry I could not provide better news.
#57
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
#58
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
#60
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Thanks to everyone for your patience, and especially to those who helped with our test phase.
As a result we're making one minor change to one of the vent mounting points to further ease installation, but the overall design is now finalized.
@fontana302 thank you - the kit with the side vents will be loaded by end of tomorrow (and available for pre-order) on our site, with the first batch ready to ship on 29 Jun.
One more pic:
As a result we're making one minor change to one of the vent mounting points to further ease installation, but the overall design is now finalized.
@fontana302 thank you - the kit with the side vents will be loaded by end of tomorrow (and available for pre-order) on our site, with the first batch ready to ship on 29 Jun.
One more pic: