Rennlist - Porsche Discussion Forums
0 2021/03/25 14:22:52
0 2021/03/25 14:22:10
0 2021/03/25 14:19:47
0 2021/03/25 14:15:53
0 2021/02/11 20:27:55
0 2021/02/11 20:26:51
0 2021/01/10 20:14:54
0 2021/01/03 08:04:30
0 2021/01/03 07:25:26
0 2021/01/03 07:23:55
0 2021/01/03 07:15:46
0 2021/01/03 07:15:45
0 2021/01/03 07:15:44
0 2021/01/03 07:15:42
0 2021/01/03 07:14:48
0 2021/01/03 07:14:47
0 2021/01/03 07:14:45
0 2021/01/03 07:14:44
0 2020/12/19 04:58:26
0 2020/11/20 05:48:05
0 2020/11/20 05:48:00
0 2020/11/20 05:47:56
0 2020/08/19 10:19:00
0 2020/08/02 14:32:22
0 2020/07/29 17:57:22
0 2020/07/23 20:39:15
0 2020/07/05 08:56:51
0 2020/07/03 08:50:53
0 2020/07/03 08:27:11
0 2020/07/03 08:20:58
With no glare, you can see the engine details.
With no glare, you can see the engine details.
0 2020/07/01 16:24:45
Like this image but the sun-glare was a fluke/bad operator.
Like this image but the sun-glare was a fluke/bad operator.
0 2020/07/01 16:17:43
0 2020/07/01 16:16:56
0 2020/07/01 16:16:04
0 2020/06/25 07:46:14
0 2020/06/23 21:10:54
I printed it with this face 'down' which gave a very nice finished surface that you would see when it was installed.
I printed it with this face 'down' which gave a very nice finished surface that you would see when it was installed.
0 2020/06/05 07:15:30
It was designed to be a press fit into the 52mm Momo hole. I then bought the factory version and see they have a spring steel ring pushing plastic prongs out to hold in place = better solution but the press fit of mine is ok.
It was designed to be a press fit into the 52mm Momo hole. I then bought the factory version and see they have a spring steel ring pushing plastic prongs out to hold in place = better solution but the press fit of mine is ok.
0 2020/06/05 07:15:29
It does also suit the FDM gearknob with white lettering that I also just fitted.
It does also suit the FDM gearknob with white lettering that I also just fitted.
0 2020/06/05 07:15:28
Nearly there...
Nearly there...
0 2020/06/05 07:15:23