Rennlist - Porsche Discussion Forums
0 2024/03/18 07:33:16
Secondary Fuse box for the new electrics. One side is constant 12v and the other switched. Each circuit is individually fused and don't have to mess up the OEM wiring.
Secondary Fuse box for the new electrics. One side is constant 12v and the other switched. Each circuit is individually fused and don't have to mess up the OEM wiring.
0 2024/03/18 20:13:14
Remote door lock actuators installed
Remote door lock actuators installed
0 2024/03/18 20:13:28
Lots of wiring fun
Lots of wiring fun
0 2024/03/18 20:13:36
Relay used to convert the ground signal from the remote lock controller to a 12v trigger to pop the hatch. Original switch works also.
Relay used to convert the ground signal from the remote lock controller to a 12v trigger to pop the hatch. Original switch works also.
0 2024/03/18 20:13:45
While running wires from the battery area for the new fuse panel, fixed a small hole with JB Weld then painted the try with Eastwood Rust Encapsulator texture paint and cleared the drain channel.
While running wires from the battery area for the new fuse panel, fixed a small hole with JB Weld then painted the try with Eastwood Rust Encapsulator texture paint and cleared the drain channel.
0 2024/03/18 20:13:52
JP testing out some of the new stuff
JP testing out some of the new stuff
0 2024/03/18 20:13:59
New Sony head unit installed and new shift knob and boot. Radio has BT streaming and hands free calling, display colors are customizable to match the interior lighting, shift pattern illuminates red when lights are turned on and the radio dims. Radio is 45 watts RMS and powers the Infiniti Kappa speakers installed by the PO well without amps. Also has an app to customize the settings.
New Sony head unit installed and new shift knob and boot. Radio has BT streaming and hands free calling, display colors are customizable to match the interior lighting, shift pattern illuminates red when lights are turned on and the radio dims. Radio is 45 watts RMS and powers the Infiniti Kappa speakers installed by the PO well without amps. Also has an app to customize the settings.
0 2024/03/18 20:14:05
Auto dimming rearview mirror
Auto dimming rearview mirror
0 2024/03/18 20:14:12
0 2024/03/21 05:54:17
0 2024/03/21 05:54:30
0 2024/03/21 14:18:09
Auxiliary Fuse Box mounts with click Velcro up and out of the way.
Auxiliary Fuse Box mounts with click Velcro up and out of the way.
0 2024/03/22 07:30:23
16v Cam Cover
16v Cam Cover
0 2024/03/22 07:33:16
0 2024/03/22 07:33:20
0 2024/03/22 07:37:39
0 2024/03/23 14:15:22
0 2024/03/23 14:15:33
0 2024/03/23 14:15:41
0 2024/03/23 14:15:51
0 2024/03/23 14:15:58
Here's the solenoid valve with the proper sized hose barbs
Here's the solenoid valve with the proper sized hose barbs
0 2024/03/24 13:38:54
Drilled a small hole in the cowm area and fished an insulated wire pair through to the interior.
Drilled a small hole in the cowm area and fished an insulated wire pair through to the interior.
0 2024/03/24 13:39:02
Here's the solenoid valve with the proper sized hose barbs installed and I shortened the barbs so it would fit in the factory location.
Here's the solenoid valve with the proper sized hose barbs installed and I shortened the barbs so it would fit in the factory location.
0 2024/03/24 13:39:09
I have a secondary fuse.box installed in this car so I don't have to corrupt the factory wiring for my accessories. One side is constant power (remote door locks and hatch release, etc and one side for switched power like Homelink dimming rear view mirror, inside powered stereo antenna, etc). I had an open switched circuit which is how I supplied power for this
I have a secondary fuse.box installed in this car so I don't have to corrupt the factory wiring for my accessories. One side is constant power (remote door locks and hatch release, etc and one side for switched power like Homelink dimming rear view mirror, inside powered stereo antenna, etc). I had an open switched circuit which is how I supplied power for this
0 2024/03/24 13:39:17
Also had to shorten the coolant barb off the back of the engine but there's no need for that to be 4" long like it is, so it's about half that size now and the valve fits perfectly. It's as far back as possible, canted to be low for the airbox and doesn't touch any of the metal lines in that area.
Also had to shorten the coolant barb off the back of the engine but there's no need for that to be 4" long like it is, so it's about half that size now and the valve fits perfectly. It's as far back as possible, canted to be low for the airbox and doesn't touch any of the metal lines in that area.
0 2024/03/24 13:39:24
Mounted the light up push button switch in the trim panel under the pod over to the right side.
Mounted the light up push button switch in the trim panel under the pod over to the right side.
0 2024/03/24 13:39:33
X
X
0 2024/03/24 13:39:40
0 2024/03/24 13:39:47
Here's the switch and panel remounted
Here's the switch and panel remounted
0 2024/03/24 13:48:34
Parcel shelf reinstalled
Parcel shelf reinstalled
0 2024/03/24 13:48:43
0 2024/03/24 13:48:51
Wiring of the solenoid complete
Wiring of the solenoid complete
0 2024/03/24 13:48:58
Passenger shelf reinstalled with self dary fuse box mounted to the underside.
Passenger shelf reinstalled with self dary fuse box mounted to the underside.
0 2024/03/24 13:49:06
Switch lights up with a red ring when activated.
Switch lights up with a red ring when activated.
0 2024/03/24 13:49:13
0 2024/03/24 13:49:18
0 2024/03/24 20:22:34
0 2024/03/24 20:22:47
0 2024/03/24 20:22:55
Old cap had some wear
Old cap had some wear
0 2024/03/24 20:23:01