Rennlist - Porsche Discussion Forums
Red to grey twisted together and wrapped. Red wire H25 connected to Grey XV(87)
Red to grey twisted together and wrapped. Red wire H25 connected to Grey XV(87)
0 2025/03/25 18:06:57
Wire was simply twisted and wrapped?! W14 to XVI Relay(EZF)87 Hooked up properly, but no idea why this was done. W14 out goes to LH18 & EZF25
Wire was simply twisted and wrapped?! W14 to XVI Relay(EZF)87 Hooked up properly, but no idea why this was done. W14 out goes to LH18 & EZF25
0 2025/03/25 17:51:38
Reset pin
Reset pin
0 2025/03/25 17:49:44
Pin missing from the plug
Pin missing from the plug
0 2025/03/25 17:49:42
0 2025/03/25 17:49:13
0 2025/03/25 17:48:24
First one. Traced the two grey wires. One goes to the 15amp fuel pump/O2 sensor fuse, then to U15. Other goes to pin Q14, which goes to U15. They are connected as they should be, but oddly rather than connecting thru U15 plug it’s all taped together!?
First one. Traced the two grey wires. One goes to the 15amp fuel pump/O2 sensor fuse, then to U15. Other goes to pin Q14, which goes to U15. They are connected as they should be, but oddly rather than connecting thru U15 plug it’s all taped together!?
0 2025/03/25 17:40:48
First look. Electrical tape and some odd wires spliced in. Also, one wire tied into the wiring directly. More to come.
First look. Electrical tape and some odd wires spliced in. Also, one wire tied into the wiring directly. More to come.
0 2025/03/25 17:36:48
0 2025/03/22 05:00:28
0 2025/03/22 05:00:12
0 2025/03/22 04:59:47
This was how I received it.
This was how I received it.
0 2025/03/07 17:17:44
Marked teeth with paint to look for where flywheel is engaging
Marked teeth with paint to look for where flywheel is engaging
0 2025/03/06 15:55:10
Build quality looks very good
Build quality looks very good
0 2025/03/06 15:55:09
Much more compact
Much more compact
0 2025/03/06 15:55:07
Tools used and starter out! New one arrives, tomorrow.
Tools used and starter out! New one arrives, tomorrow.
0 2025/03/04 16:19:45
Cut 8mm with 8mm wrench(held with butyl tape)
Cut 8mm with 8mm wrench(held with butyl tape)
0 2025/03/04 16:19:42
Used several tools together with 8mm Allen. Worked perfectly!
Used several tools together with 8mm Allen. Worked perfectly!
0 2025/03/04 16:19:39
Soaked with Kroil Penetrant
Soaked with Kroil Penetrant
0 2025/03/04 16:19:36
I like keeping files on work done for the future
I like keeping files on work done for the future
0 2025/03/04 16:19:33
0 2025/03/04 16:11:33
Used a cut 8mm Allen, stuck into an 8mm wrench with butyl tape to secure
Used a cut 8mm Allen, stuck into an 8mm wrench with butyl tape to secure
0 2025/03/04 16:11:25
0 2025/03/04 16:11:21
The multiple of tools put together worked perfectly to loosen the bolts
The multiple of tools put together worked perfectly to loosen the bolts
0 2025/03/04 16:11:19
I like to keep files, so here is what I did
I like to keep files, so here is what I did
0 2025/03/04 16:11:15
0 2025/02/23 09:19:31
0 2025/02/18 15:43:35
0 2025/02/18 15:42:56
$19 kit from HF, worth having in the tool box
$19 kit from HF, worth having in the tool box
0 2025/02/16 14:24:55
After
After
0 2025/02/16 14:17:41
Before
Before
0 2025/02/16 14:17:37
Old water pump off, cleaned up, new gasket(permatex water pump gasket maker) new pump installed
Old water pump off, cleaned up, new gasket(permatex water pump gasket maker) new pump installed
0 2025/02/09 16:40:30
Created templates for each step, labeled to make install easier. Cleaned every screw in CRC rust remover(huge difference)
Created templates for each step, labeled to make install easier. Cleaned every screw in CRC rust remover(huge difference)
0 2025/02/09 16:40:24
Used cardboard for a template, as I took the screws out. 2 different sizes. Bought the new screw set from Roger. Glad I did, screws were very rusty.
Used cardboard for a template, as I took the screws out. 2 different sizes. Bought the new screw set from Roger. Glad I did, screws were very rusty.
0 2025/02/09 16:40:19
0 2025/02/09 16:40:13
All buttoned up
All buttoned up
0 2025/01/29 16:55:25
Good space to work with(wife doesn’t use the yoga mats anymore:)
Good space to work with(wife doesn’t use the yoga mats anymore:)
0 2025/01/29 16:55:15
Workroom
Workroom
0 2025/01/29 16:55:05
Looking to attach mityvac into the 6 o'clock position on the 7 way diverter
Looking to attach mityvac into the 6 o'clock position on the 7 way diverter
0 2025/01/15 11:06:35
Both looked like they were replaced years ago, but not sure which type of hose/size to cut and install.
Both looked like they were replaced years ago, but not sure which type of hose/size to cut and install.
0 2025/01/01 07:54:54