Rennlist - Porsche Discussion Forums
0 2016/03/04 14:27:59
0 2016/03/04 14:28:07
Don't use a screw driver unless it's wrapped with tape
Don't use a screw driver unless it's wrapped with tape
0 2016/03/07 11:01:59
Goo Gone takes a while, but it's easier ton the paint than Goof Off.
Goo Gone takes a while, but it's easier ton the paint than Goof Off.
0 2016/03/07 11:02:11
0 2016/03/12 18:11:59
0 2016/03/12 18:13:43
Uh oh, fan belt warning light...
Uh oh, fan belt warning light...
0 2016/03/12 21:11:38
Genuine Porsche replacement part
Genuine Porsche replacement part
0 2016/03/12 21:13:23
Note the two positioning tabs
Note the two positioning tabs
0 2016/03/12 21:13:32
Push in retaining clip and pull plug out
Push in retaining clip and pull plug out
0 2016/03/12 21:15:38
Uh oh...
Uh oh...
0 2016/03/12 21:26:19
Genuine Porcshe Fan Belt Sensor
Genuine Porcshe Fan Belt Sensor
0 2016/03/12 21:27:41
Note the two positioning tabs
Note the two positioning tabs
0 2016/03/12 21:27:49
Push in retaining clip and pull out plug
Push in retaining clip and pull out plug
0 2016/03/12 21:28:13
New genuine Porsche part on right, old failed unit (an OEM knockoff) on right
New genuine Porsche part on right, old failed unit (an OEM knockoff) on right
0 2016/03/12 21:28:24
Use a rubber band to pull wheel up and out of the way for install
Use a rubber band to pull wheel up and out of the way for install
0 2016/03/12 21:28:31
Hand tighten bolt with 5MM allen socket (use 5MM allen wrench to tighten last turn)
Hand tighten bolt with 5MM allen socket (use 5MM allen wrench to tighten last turn)
0 2016/03/12 21:33:23
Remove the rubber band (wheel sits perfectly)
Remove the rubber band (wheel sits perfectly)
0 2016/03/12 21:34:58
Push in retaining wire and insert plug
Push in retaining wire and insert plug
0 2016/03/12 21:36:52
Fire it up, and go for a ride!
Fire it up, and go for a ride!
0 2016/03/12 21:37:46
0 2016/03/13 13:08:21
0 2016/03/13 13:08:27
0 2016/03/14 14:10:13
0 2016/03/14 14:24:14
Fister I's tilting scale at 16 lbs. each
Fister I's tilting scale at 16 lbs. each
0 2016/03/15 17:14:16
Old door seal was frayed and torn
Old door seal was frayed and torn
0 2016/03/20 15:55:24
Pulled the door seal off and removed the glue with Goo Gone
Pulled the door seal off and removed the glue with Goo Gone
0 2016/03/20 15:56:08
Happy with new OEM (but not genuine Porsche) door seal from Pelican for $142.25
Happy with new OEM (but not genuine Porsche) door seal from Pelican for $142.25
0 2016/03/20 15:56:55
Old genuine Porsche door seal will make a nice few patches for someone...
Old genuine Porsche door seal will make a nice few patches for someone...
0 2016/03/20 15:58:01
The beer!
The beer!
0 2016/03/20 16:03:20
Not sure they even make these turbo scoops anymore
Not sure they even make these turbo scoops anymore
0 2016/03/21 18:14:17
New H4 lamps
New H4 lamps
0 2016/03/21 18:14:26
0 2016/03/23 14:51:05
Don't strip your O2 sensor (like me) with an open end wrench
Don't strip your O2 sensor (like me) with an open end wrench
0 2016/03/28 16:49:03
0 2016/03/31 17:06:10
Here's the Carrera logo from Lloyd's in a custom thread (matches zenith blue) ordered from Datin at FD Motrorport (wide ovals not included)
Here's the Carrera logo from Lloyd's in a custom thread (matches zenith blue) ordered from Datin at FD Motrorport (wide ovals not included)
0 2016/04/05 23:13:38
Lloyd's Lux Mats
Lloyd's Lux Mats
0 2016/04/05 23:13:46
0 2016/04/05 23:38:37
0 2016/04/06 11:21:48
0 2016/04/08 10:36:57