Rennlist - Porsche Discussion Forums
0 2016/01/10 13:43:53
0 2016/01/13 19:13:46
0 2016/01/13 19:14:46
0 2016/01/14 13:36:06
Inappropriate
Inappropriate
0 2016/01/18 12:04:37
right headlight (screen left) with old stock bulb awaiting new ballast
right headlight (screen left) with old stock bulb awaiting new ballast
0 2016/01/18 17:43:37
new ballast on right ready for install
new ballast on right ready for install
0 2016/01/18 17:44:42
Pull pin up (push in plastic clip to help release) from 9:00 position...
Pull pin up (push in plastic clip to help release) from 9:00 position...
0 2016/01/18 17:45:54
To pin at 12:00 position
To pin at 12:00 position
0 2016/01/18 17:47:33
and headlight is ready to slide out
and headlight is ready to slide out
0 2016/01/18 17:48:07
Release retaining clip and open unit
Release retaining clip and open unit
0 2016/01/18 17:48:45
Hopefully there are pre-drilled holes in cover (if not, you can order one, or just though-bolt) - simply attach the ballast with the two screws provided
Hopefully there are pre-drilled holes in cover (if not, you can order one, or just though-bolt) - simply attach the ballast with the two screws provided
0 2016/01/18 17:49:37
Disconnect the brown and yellow wires, and then remove the stock halogen bulb
Disconnect the brown and yellow wires, and then remove the stock halogen bulb
0 2016/01/18 17:54:28
Connect the brown wire to black, the yellow wire to red, and carefully insert the new xenon bulb (the bulb uses the same M-1 mount, but you will need to drill a bigger hole for the new bulb - hold the unit with lens pointed up to avoid debris from getting into the headlight assembly and drill in reverse carefully to increase the diameter of the bulb opening). Heat to shrink, and tape up.
Connect the brown wire to black, the yellow wire to red, and carefully insert the new xenon bulb (the bulb uses the same M-1 mount, but you will need to drill a bigger hole for the new bulb - hold the unit with lens pointed up to avoid debris from getting into the headlight assembly and drill in reverse carefully to increase the diameter of the bulb opening). Heat to shrink, and tape up.
0 2016/01/18 17:56:08
Note even with the shrink wrap , the lead is exposed. Tape up!
Note even with the shrink wrap , the lead is exposed. Tape up!
0 2016/01/18 17:57:40
Attach the two pin HID bulb connector onto the bulb terminal an reattach the cover making sure the transformer is not in the way.
Attach the two pin HID bulb connector onto the bulb terminal an reattach the cover making sure the transformer is not in the way.
0 2016/01/18 18:13:30
Line up the headlight assembly so it slides back into the tracks
Line up the headlight assembly so it slides back into the tracks
0 2016/01/18 18:19:25
slide headlight back in
slide headlight back in
0 2016/01/18 18:22:29
Rotate locking pin back to the 9:00 position to secure headlight
Rotate locking pin back to the 9:00 position to secure headlight
0 2016/01/18 18:22:50
Time for a beer!
Time for a beer!
0 2016/01/18 18:23:39
0 2016/01/19 18:01:33
0 2016/02/04 16:32:34
0 2016/02/06 13:48:24
0 2016/02/06 21:44:31
0 2016/02/13 08:45:53
0 2016/02/18 16:39:16
0 2016/02/18 16:39:19
0 2016/02/18 16:56:18
0 2016/02/18 23:05:12
0 2016/02/24 19:10:11
0 2016/02/26 12:37:44
0 2016/02/26 21:07:13
0 2016/02/26 21:07:18
0 2016/02/27 09:18:02
0 2016/02/27 10:06:07
Uh oh
Uh oh
0 2016/02/28 14:05:42
Isn't there supposed to be a wheel on the brass ring?
Isn't there supposed to be a wheel on the brass ring?
0 2016/02/28 14:05:46
0 2016/02/29 04:01:39
0 2016/03/03 16:49:24
0 2016/03/03 16:49:28