Rennlist - Porsche Discussion Forums
0 2021/02/13 15:04:44
It's the big fatty splice you can see in the lower left quadrant of the picture. You can sort of trace how the injector wires run to it as they curve out along their branch to the left
It's the big fatty splice you can see in the lower left quadrant of the picture. You can sort of trace how the injector wires run to it as they curve out along their branch to the left
0 2021/02/06 08:00:33
For a later post, these are splices M and IJ
For a later post, these are splices M and IJ
0 2021/02/06 07:55:05
This one runs to the
This one runs to the
0 2021/02/06 07:46:02
This one runs to the
This one runs to the
0 2021/02/06 07:45:57
Pin 40 is where things are spliced together
Pin 40 is where things are spliced together
0 2021/02/06 07:43:36
I don't really know what this does but it's tied, ultimately, to the injectors for some reason
I don't really know what this does but it's tied, ultimately, to the injectors for some reason
0 2021/02/06 07:40:16
I tried to get a closeup of the splice itself, just in case
I tried to get a closeup of the splice itself, just in case
0 2021/02/06 07:38:35
Here's the overall arrangement
Here's the overall arrangement
0 2021/02/06 07:38:29
The coding plug. I don't know that I will ever use this.
The coding plug. I don't know that I will ever use this.
0 2021/02/06 07:35:49
DME Pins 10 & 28
DME Pins 10 & 28
0 2021/02/06 07:32:12
DME Pins 47 and 48
DME Pins 47 and 48
0 2021/02/06 07:29:26
More documentation is better, I guess
More documentation is better, I guess
0 2021/02/06 07:24:39
Why 2 pictures? I don't remember
Why 2 pictures? I don't remember
0 2021/02/06 07:24:33
The snorkel is off by this point, in case it isn't clear
The snorkel is off by this point, in case it isn't clear
0 2021/02/06 07:19:09
Initially I was going to put clear shrink tube over every label but then I got lazy. Some things are a bridge too far
Initially I was going to put clear shrink tube over every label but then I got lazy. Some things are a bridge too far
0 2021/02/06 07:16:25
Blue painters tape and printed shrink tube
Blue painters tape and printed shrink tube
0 2021/02/06 07:16:18
Closeup of the black goop
Closeup of the black goop
0 2021/02/06 06:59:45
Closeup of the brown goop
Closeup of the brown goop
0 2021/02/06 06:59:40
Splitting the PVC
Splitting the PVC
0 2021/02/06 06:59:33
Closeup of the PVC tubing right before the split
Closeup of the PVC tubing right before the split
0 2021/02/06 06:59:27
The snorkel pulled away from the black PVC tubing
The snorkel pulled away from the black PVC tubing
0 2021/02/06 06:59:20
This is where everything branches off to various parts of the engine.
This is where everything branches off to various parts of the engine.
0 2021/02/06 06:59:13
These connector numbers correspond to a Google Sheets document that I'll share in a follow up post.
These connector numbers correspond to a Google Sheets document that I'll share in a follow up post.
0 2021/02/06 06:45:51
Injector connector: Looking pretty good, tbh
Injector connector: Looking pretty good, tbh
0 2021/02/06 06:40:22
Temperature sensor; I don't really know what's hiding under that shrink wrap stuff. It's a real pain to take off.
Temperature sensor; I don't really know what's hiding under that shrink wrap stuff. It's a real pain to take off.
0 2021/02/06 06:40:17
Knock sensor: But this one wasn't far behind
Knock sensor: But this one wasn't far behind
0 2021/02/06 06:40:12
Knock sensor: This is the main offender for my CEL
Knock sensor: This is the main offender for my CEL
0 2021/02/06 06:40:07
0 2021/01/29 14:52:09
0 2021/01/29 14:51:56
The 2 missing bends would bring the middle of the tube in between the 2 little fingers which are cast into the caliper. Usually, there is a foam tube thing that lives around the tubing and fits into the fingers
The 2 missing bends would bring the middle of the tube in between the 2 little fingers which are cast into the caliper. Usually, there is a foam tube thing that lives around the tubing and fits into the fingers
0 2021/01/29 14:51:43
You can see that one ground is already connected to the point on the engine block. The bellhousing ground is on the bottom.
You can see that one ground is already connected to the point on the engine block. The bellhousing ground is on the bottom.
0 2021/01/24 12:09:32
The black connector will also have a 90 degree backplate eventually, to route the wires away from the block
The black connector will also have a 90 degree backplate eventually, to route the wires away from the block
0 2021/01/24 12:07:12
Crappy basement lighting, apologies
Crappy basement lighting, apologies
0 2021/01/24 12:04:21
She's OK from far, but far from OK
She's OK from far, but far from OK
0 2021/01/16 14:00:57
General arrangement of the connections I'm asking about, with the red boxed wires highlighted that seem to do the same thing
General arrangement of the connections I'm asking about, with the red boxed wires highlighted that seem to do the same thing
0 2021/01/10 08:47:09
That big pile of dirt is from the cleaning I've done while the car has been up on the lift. I'm thinking I've got the equivalent of about 5 HP back ;)
That big pile of dirt is from the cleaning I've done while the car has been up on the lift. I'm thinking I've got the equivalent of about 5 HP back ;)
0 2021/01/10 08:04:03
It's helpful to have a genuine Speed Yellow comparison piece.
It's helpful to have a genuine Speed Yellow comparison piece.
0 2021/01/10 07:56:50
I'm still deciding on what to do about shims. The car hasn't had any while I've owned it and I don't know how much of a difference it would make to things.
I'm still deciding on what to do about shims. The car hasn't had any while I've owned it and I don't know how much of a difference it would make to things.
0 2021/01/10 07:53:45
It's a little difficult to avoid some damage to the paint on reinstallation when the nuts slide around on the tube, as you can see on the right in the picture.
It's a little difficult to avoid some damage to the paint on reinstallation when the nuts slide around on the tube, as you can see on the right in the picture.
0 2021/01/10 07:48:26