Duralite wheels, part sourcing?
#1
1st Gear
Thread Starter
Join Date: Aug 2013
Location: Ohio
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Duralite wheels, part sourcing?
Hello all,
I've come across an incomplete set of Duralite wheels for my track project car. These wheels were made for a 930 I believe, I do not know how common or uncommon these were but I'm hoping someone may have some information for me.
Here is a photo of the wheels.
They are 16x12 in the rear as shown, which is a little too wide for my setup. For the front I only have the wheel centers, no barrels or lips.
Would any of you happen to know where I might be able to source lips/barrels for these wheels? I'm not opposed to having them "custom" made, but I don't know where to turn for that either.
Any advice would be much appreciated!
I've come across an incomplete set of Duralite wheels for my track project car. These wheels were made for a 930 I believe, I do not know how common or uncommon these were but I'm hoping someone may have some information for me.
Here is a photo of the wheels.
They are 16x12 in the rear as shown, which is a little too wide for my setup. For the front I only have the wheel centers, no barrels or lips.
Would any of you happen to know where I might be able to source lips/barrels for these wheels? I'm not opposed to having them "custom" made, but I don't know where to turn for that either.
Any advice would be much appreciated!
#2
Three Wheelin'
Hi,
I justed posted info. on a similar thread that might be helpful.
https://rennlist.com/forums/wheel-an...e-barrels.html
Scott
I justed posted info. on a similar thread that might be helpful.
https://rennlist.com/forums/wheel-an...e-barrels.html
Scott