Fikse FM10 & toyo proxes
#1
Racer
Thread Starter
Join Date: Aug 2006
Location: Germantown, MD
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Fikse FM10 & toyo proxes
Hi,
I'm selling a set of Fikse FM/10's with a (almost) new set of toyo t1 proxes (under 2K miles) and 14 mm H&R hubcentric spacers.
Wheels are 18x10 & 18x8 - tires are 285 30's & 225 40's. Wheels have zero curb rash (recently redone) & are perfectly straight but do have some light scratches/oxidation which could be polished out. They'd make awesome track wheels as they wiegh in the low 20 's w/tires.
I'm not sure about offset but fit a 996 NB like stock, which is why I used the spacers.
Tires were $780 & spacers were $150 and O/O paid 6,500 for the wheels from stealership. Prefer to sell local, but since I'm located in Germantown MD I doubt that will happen.
Best way to reach me is email - markjlawson@verizon.net
$3,000 obo
I'm selling a set of Fikse FM/10's with a (almost) new set of toyo t1 proxes (under 2K miles) and 14 mm H&R hubcentric spacers.
Wheels are 18x10 & 18x8 - tires are 285 30's & 225 40's. Wheels have zero curb rash (recently redone) & are perfectly straight but do have some light scratches/oxidation which could be polished out. They'd make awesome track wheels as they wiegh in the low 20 's w/tires.
I'm not sure about offset but fit a 996 NB like stock, which is why I used the spacers.
Tires were $780 & spacers were $150 and O/O paid 6,500 for the wheels from stealership. Prefer to sell local, but since I'm located in Germantown MD I doubt that will happen.
Best way to reach me is email - markjlawson@verizon.net
$3,000 obo
#2
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Just a thought, if you call Fikse with the serial numbers, they can probably tell you the specs (i.e. offset) they were built with.
Last edited by Tonydec; 07-08-2007 at 03:13 AM.