PSE Install in SF Bay Area
09-13-2021, 04:51 PM
#2
Three Wheelin'
I don't know exactly where you are but if the PSE is not new, you could also have it cleaned up and ceramic coated at FD Motorsports in Brentwood.
https://fdmotorsports.net/
No affiliation but Darrin had my exhaust off and a new exhaust on within an hour for sure...with new hardware to boot.
Edit:
here is a video of a guy doing a restoration on a used PSE at FD.
https://fdmotorsports.net/
No affiliation but Darrin had my exhaust off and a new exhaust on within an hour for sure...with new hardware to boot.
Edit:
here is a video of a guy doing a restoration on a used PSE at FD.
Last edited by jamesinger; 09-13-2021 at 04:53 PM.
10-24-2021, 11:25 AM
#3
Anyone else have any experience getting their PSE coded in in the bay area?
10-24-2021, 09:45 PM
#4
Intermediate
Thread Starter
Haven't gotten it done yet. I called one place that was recommended by PCA but when I said I would be buying PSE on my own from SunCoast they seemed to lose interest (they'd lose out on the margin for the parts). They were supposed to check something on their end and call me back but never did. I'll check out other places when things slow down a bit at work as I'm not in a big rush.
09-13-2022, 03:05 AM
#5
Haven't gotten it done yet. I called one place that was recommended by PCA but when I said I would be buying PSE on my own from SunCoast they seemed to lose interest (they'd lose out on the margin for the parts). They were supposed to check something on their end and call me back but never did. I'll check out other places when things slow down a bit at work as I'm not in a big rush.
Were you able to find a shop in the Bay Area that could do this? I’m in the same boat
09-14-2022, 02:17 PM
#6
Its actually a pretty easy install if you're remotely interested in DIY and have some tools. I was able to do it all myself except for having the new PSE button programmed at the dealer.
