Mark this thread as Unsold
1992 Porsche 911 964 C4 Turbo
06-22-2013, 12:42 PM
#1
1992 Porsche 911 964 C4 Turbo
Year: 1992
Make: Porsche
Model: 911
Cont. Porsche Models: 964 C4
Mileage (numbers only please): 59000
Color: Black
VIN: WP0AB2961NS420637
Price (no $ sign please): $30000
Private or Dealer Listing: Private Listing
Location (Region): SouthEast
Body Style: Coupe
Transmission Type: Manual - 5 speed
2 or 4 Wheel Drive?: 4 Wheel Drive
Engine Type: Fuel Injection
Stereo System: AM Radio
20,000 miles ago, the car was sent to TPC in Maryland for a motor build, turbo conversion, and suspension install.
The option list on this car is almost too long to list:
Custom TPC single turbo install
Profec boost controller
TPC intercooler
Piggyback engine management system
Custom headers with heat
Big Red brake upgrade front/rear
Original Cup shocks updated to KW clubsports last year
Full bolt in roll-bar
Recaro Pole Positions
Recent Schroth harnesses
Momo Cup wheel
Rennline airbag delete, radio delete, floor plates
RS door panels
A/C is all installed but not blowing cold. May just need a R12 recharge or conversion to R134.
No know accident damage
The car just passed the emission sniffer test with no cats and was super clean
Runs perfect!
Drive on the street, drive to the track and drive home.
Car has seen 2 track weekends with the current owner.
Reliable 400+ RWHP with very streetable suspension and alignment.
TPC build sheets available.
Thanks!
Last edited by onefstm; 08-08-2013 at 09:56 AM.
06-24-2013, 03:37 PM
#2
Rennlist Member
Join Date: Sep 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Greetings,
Where are you located? Is there an independent Porsche shop nearby who could do a PPI for me? What work would you think it needs? I am interested.
What engine is in it? Has it hat a leakdown? Does the turbo or engine smoke?
Thanks!
Steve Park (former 1994 3.6L turbo owner,
blew the engine) PCA since 1983.
spark123@comcast.net
Where are you located? Is there an independent Porsche shop nearby who could do a PPI for me? What work would you think it needs? I am interested.
What engine is in it? Has it hat a leakdown? Does the turbo or engine smoke?
Thanks!
Steve Park (former 1994 3.6L turbo owner,
blew the engine) PCA since 1983.
spark123@comcast.net
06-24-2013, 03:41 PM
#3
The car is located in Franklin/Nashville, TN. I would recommend either Music City P&A or Renntag Motorwerks for a PPI. No smoke from the engine or turbo, even without a cat. Passes emissions also without a cat. I have a start up video; however, it is on my other computer at home.
Leakdown was done 18 months ago and was very good.
Leakdown was done 18 months ago and was very good.
06-24-2013, 03:45 PM
#4
The motor is a twinplug 3.6 with lowered compression, built by TPC in Maryland.
http://www.tpcracing.com/
http://www.tpcracing.com/
Trending Topics
07-11-2013, 05:44 PM
#9
