Spyder Modifications
#736
Three Wheelin'
#739
Very nice!!!!
#741
They are polished aluminum, not chrome. I have had polished wheels in the past, you could clear them, I don't like that. I plan on keeping them clean. They should last a long time, they may require a good clean and polish every fall but I like them.
Last edited by blacksheepSpyder; 05-28-2017 at 10:11 PM.
#742
Pro
So when i purchased my Spyder new I was not able to spec it myself it came with basic cdr31 and Bose
Anyhow i wish my car had pcm3.1 with nav and satilite
Has any one attempted this ?
http://www.planet-9.com/981-cayman-a...n-boxster.html
I'm gathering info and list of all the parts needed to put her under the knife again
Welcome any input suggestions or advice
Anyhow i wish my car had pcm3.1 with nav and satilite
Has any one attempted this ?
http://www.planet-9.com/981-cayman-a...n-boxster.html
I'm gathering info and list of all the parts needed to put her under the knife again
Welcome any input suggestions or advice
#743
dont do it. suncoast sells an adapter, get an aftermarket radio if you want
get this for backup cam quickvucams.com
and use google maps on your phone for nav. it gets updated for free all the time.
get this for backup cam quickvucams.com
and use google maps on your phone for nav. it gets updated for free all the time.
#745
Three Wheelin'
I will be totally honest the nav is awful and you will never use it. I have it in my 991 and other than a slightly more high Rez screen the functions are the same for audio. Waste of money and time to add it and you get that ugly wart on your trunk.
So when i purchased my Spyder new I was not able to spec it myself it came with basic cdr31 and Bose
Anyhow i wish my car had pcm3.1 with nav and satilite
Has any one attempted this ?
http://www.planet-9.com/981-cayman-a...n-boxster.html
I'm gathering info and list of all the parts needed to put her under the knife again
Welcome any input suggestions or advice
Anyhow i wish my car had pcm3.1 with nav and satilite
Has any one attempted this ?
http://www.planet-9.com/981-cayman-a...n-boxster.html
I'm gathering info and list of all the parts needed to put her under the knife again
Welcome any input suggestions or advice
#747
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Now that's what i'm talking about haha. Lowest hanging fruit on the car and sounds incredible with the factory PSE. You'll like it
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#749
Race Director
Thread Starter
And for my latest thrill....
...after the gt2RS came out, I remembered how much I love the red interior/gt silver exterior/carbon and light gold wheels look.. so I'm going to do my first not-easily reversible mod, and actually have the wheels painted the same light gold look as the GT2. I don't like the silver on silver look I have now, and I knew that I wouldn't be happy until I had some proper paint on them so... here goes. Should be ready by next week
I'm having the paint shop send me samples of the gold they have.. tough part I think will be them finding the matching color.. the Porsche GT2 version is SO subtle, and I want it just like that.
...after the gt2RS came out, I remembered how much I love the red interior/gt silver exterior/carbon and light gold wheels look.. so I'm going to do my first not-easily reversible mod, and actually have the wheels painted the same light gold look as the GT2. I don't like the silver on silver look I have now, and I knew that I wouldn't be happy until I had some proper paint on them so... here goes. Should be ready by next week
I'm having the paint shop send me samples of the gold they have.. tough part I think will be them finding the matching color.. the Porsche GT2 version is SO subtle, and I want it just like that.