When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Been a member of Rennlist for quite a while now "2006" and I think it's time for me to share my long and painfull hot rod project in the making. It started out as a high mileage C4S that I picked up in Toronto 17 years ago when prices were very cheap for those cars. I upgraded the car over the years with small upgrades and I decided to go turbo with bells and whistle in my retirement years.
Basically the car was upgraded with 993RSR front endurance 380mm brakes, RS sways, GT2 uprights, centre locks, BBS E88 wheels, Rennline caster plates at both ends, K24 turbos, turbo S ECU "450hp", PSS10 with front lowering perch, CAE shifter and proper nosed 64/51 RWD tranny
Over this winter I should have the car sunroof delete with a complete paint job that way the car while look close enough to a GT2 RWD hot rod and an intercooler upgrade.
Great project you have there! Looks like a raw machine 😎
Whats the diffrence with the new gearbox vs the original one except from rwd conversion?
And have you any plans for the interior?
keep up the good work.
The turbo tranny has a bigger ring & pinion, the gear shaft is central oiling. the tranny is beefier and longer by 30mm and can handle 600hp for a while versus the regular 993 G50/20/21 tranny can't.
07-26-2020, 01:16 PM
993 hotrod retirement project.
