How to store a floor jack
#3
Rennlist Member
I’m no expert by far, but I store my jack flat on the basis that the oil/fluid might seep out if it’s not flat
#4
There was a thread on here a while back where someone’s jack failed due to storing upright. The seals dried up and required a rebuild. I’m trying to find a way to secure it flat that works well.
#6
Rennlist Member
Are you talking long term storage or in the trailer? No way anything is going to dry up and/or fail by being in the trailer for a few hours to a day.......
Trending Topics
#8
Rennlist Member
FWIW: I have used the PitPal jack in a pouch upright storage with my jack for over 5 years. It never comes out of the trailer. Survives the coldest winters and have never had a seal fail. As it is a $125 Northern Tool special I figure I got my money's worth out of the jack should it fail. The pouch is perfect. Gets the jack out of the way and is super easy. Nothing to tie down.
#9
Rennlist Member
FWIW: I have used the PitPal jack in a pouch upright storage with my jack for over 5 years. It never comes out of the trailer. Survives the coldest winters and have never had a seal fail. As it is a $125 Northern Tool special I figure I got my money's worth out of the jack should it fail. The pouch is perfect. Gets the jack out of the way and is super easy. Nothing to tie down.
Then again, these cylinders generate thousands of pounds of pressure, so maybe it doesn’t matter either way.
#10
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Oct 2005
Location: On Rennlist, apparently
Posts: 4,447
Likes: 0
Received 37 Likes
on
18 Posts
I also use a pouch. Good quality jack lives in it during track season. No problems so far.
Pouch only fits the jack when the jack lifting point is pointing toward floor
Pouch only fits the jack when the jack lifting point is pointing toward floor