Mark this thread as Unsold
WTB: parts for auto to manual swap for 1990 928
#1
Advanced
Thread Starter
WTB: parts for auto to manual swap for 1990 928
Category: Accessories
Price (no $ sign please): $1000
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 928
Location (Region): Midwestern
Item Condition: Used
I have transmission already, TT will be from 928 international.
Need all the parts for clutch/pedals in the front as well as shift linkage and transmission support.
Any help with advice is also appreciated
IM or email me: mackoscout at gmail.com
Thanks
#2
RL Community Team
Rennlist Member
Rennlist Member
Take a serious look at doing the C5 Z06 swap with the 928 MS kit instead. Have it in my supercharged '79 and its awesome. I run '85 MPH at 2,000 RPM on the highway and can shift from any gear to any gear with the modern synchros. I bought my parts needed from Dino's Corvette. The 928MS site tells you what's needed but essentially the transfer, torque tube, shifter box, and shifter. I did a shortshift kit in mine too.
#3
+1 on the 6 speed convert. I love my GT, but often wish it had one more gear. if I had the opportunity
to do an auto to manual convert, I would go with the Z06 6 speed. have you driven a stock 5 speed?
best of luck which ever road you travel. have you tried 20th St in Arizona??
to do an auto to manual convert, I would go with the Z06 6 speed. have you driven a stock 5 speed?
best of luck which ever road you travel. have you tried 20th St in Arizona??
#4
Advanced
Thread Starter
Thanks Petza914 and Merchauser
I have a 1978 manual and it is fun and I enjoy the shifts (I had rebuilt the whole transmission and synchros).
I want to put a manual in my 1990 S4. I know about the Corvette transmission possibility but I just purchased a manual 928 transmission (newer model) so I prefer to go that route. I am most interested in sourcing the front clutch pieces - where is the best place to get new clutch disc? and of course the hardware pieces? I am planning on getting Torque tube from 928 international.
Thank you for encouragement - it is good to know I am not the only one attempting this.
I have a 1978 manual and it is fun and I enjoy the shifts (I had rebuilt the whole transmission and synchros).
I want to put a manual in my 1990 S4. I know about the Corvette transmission possibility but I just purchased a manual 928 transmission (newer model) so I prefer to go that route. I am most interested in sourcing the front clutch pieces - where is the best place to get new clutch disc? and of course the hardware pieces? I am planning on getting Torque tube from 928 international.
Thank you for encouragement - it is good to know I am not the only one attempting this.
#5
Advanced
Thread Starter
Bump.
Come on guys someone must have some clutch parts, cental clutch rod or some other pieces they need out of the garage or shop?
transmission mounts for later transmission?
shift rods?
Pedals?
will pay
Come on guys someone must have some clutch parts, cental clutch rod or some other pieces they need out of the garage or shop?
transmission mounts for later transmission?
shift rods?
Pedals?
will pay
#6
RL Community Team
Rennlist Member
Rennlist Member
I have 2 rubber pedal pads for the clutch and brake that I font need as I installed SRP Racing Pedals
Trending Topics
#8
Advanced
Thread Starter
Bump
Bump,
Looks like I will be getting most parts from 928 INT, however if anyone has any good deals on parts for swap still I have another 2 weeks before I start the project.
Looks like I will be getting most parts from 928 INT, however if anyone has any good deals on parts for swap still I have another 2 weeks before I start the project.
#11
Advanced
Thread Starter
Linkage
How much for the shift linkage (I assume front and back one with the front ball cup). Shipped to Madison?
Also pedal assembly - can you send me a photo?
I am looking at getting the rebuilt TT from 928 international as in used ones the bearings are usually gone.
Thanks
Maciej
Also pedal assembly - can you send me a photo?
I am looking at getting the rebuilt TT from 928 international as in used ones the bearings are usually gone.
Thanks
Maciej