When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi gentlemen, hope everyone is having a good Sunday (or Monday to our friends in Asia and AUS).
Digging into the S4 donor car and noticed this, which attaches to the ECU housing. The opening, that you can see in the second picture, should be where the wiring is routed through to the connector, no? There are two connectors on the outside of the ECU, the other one has the wiring routed through that opening as I would expect.
Could I ask for a more experienced set of eyes on this please?
Probably? Kinda hard to tell from your pictures. Too small. Looks like one of the connector bodies is broken or has been swapped-out.
The connector body without the exiting leads has pins that are present and wired depending upon the config of the 928. The WSM shows all the possible variations.