kylejohnston1

The servo shown in the attached pics has me baffled. It is the one all the way at the far right in the picture (driver side here in the US). Seems like the screws to remove are only accessible from underneath the servo.

Any advice on how to remove this one? Thanks!

JohnK964

They are under the ac line In Your photo

JohnK964

Below these arrows

mojorizing

To remove that servo, loosen HVAC hose bracket to the right of the yellow connector holder, disconnect linkage arm, remove the screw that is through the slot on the plate, then remove the plate/servo forward and to the side. That plate has a tab which engages a slot on the plastic case of the HVAC.

mojorizing

Circled is the tab on the plate and the slot in the case. Also see the 3 screws that attach the servo to the plate - not accessible at all.

kylejohnston1

Thanks for the great info mojorizing and JohnK964! I probably would have fidgeted with this for hours without the notes and pics above.

JohnK964

👍😎