New 996TT/GT3 Engine Case, Crankshaft and More
#1
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
New 996TT/GT3 Engine Case, Crankshaft and More
Spring cleaning at Ultimate Motorwerks.
For those that plan on building there new track engine or high HP engine.
I have 3 each 996TT/GT3/997TT New in box Engine cases.
These are the latest updated Reinforced design from Porsche which were available in 2004.
I have sent these cases to be shuffle-pinned (you can see the black dowels), the Windage mods have been cnc'd to all the main webs in the spigot bores, and oil galley modded to provide extra oil for a center drilled "x" crankshaft.
Ollie Machine have done $2K worth of work on these cases.
List price is $7051.00 Will sell for $6900 plus shipping.
For those that plan on building there new track engine or high HP engine.
I have 3 each 996TT/GT3/997TT New in box Engine cases.
These are the latest updated Reinforced design from Porsche which were available in 2004.
I have sent these cases to be shuffle-pinned (you can see the black dowels), the Windage mods have been cnc'd to all the main webs in the spigot bores, and oil galley modded to provide extra oil for a center drilled "x" crankshaft.
Ollie Machine have done $2K worth of work on these cases.
List price is $7051.00 Will sell for $6900 plus shipping.
#2
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Brand new in box 996GT3 crankshaft fully counterweighted, wide rod journal bearings. $2,695.00 each, plus shipping. I have two.
Last edited by Kevin; 04-01-2017 at 09:34 PM.
#3
Good luck with sale..
Last edited by powdrhound; 05-28-2020 at 11:59 AM.
#4
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Thread Starter
Thanks John..
I would cross drill the crank, and center drill it to reduce the heat on number 2 and 5 rod bearings..
The engine case has all the mods done to it! Saves a person 4 months "wait" time.
I would cross drill the crank, and center drill it to reduce the heat on number 2 and 5 rod bearings..
The engine case has all the mods done to it! Saves a person 4 months "wait" time.