Originally Posted by Code

I'm ready to get rid of some fender well gap, and strongly considering H&R springs for my SPASM equipped C2S. I've been researching the TechArt springs too, but I'm just not completely satisfied with the amount of drop they provide, HOWEVER, I know that if you go too low you start making compromises.

Is there anyone here running H&R springs that noticed a decrease in performance and regretted going that low? Obviously driveways and speed bumps become more of a challenge, but my main concern is adverse changes to the handling characteristics.

All feedback welcome. Thanks!

Originally Posted by Harsany

KW Height adjustable kit is amazing. Check into it.

Originally Posted by eganraC

Anyone have any picture references with H&R Sport springs and 15/7mm spacers?

Additionally, on a NON PASM car, will the drop be similar at the end of the day?

Originally Posted by bogdan_p

Here you go. H&R Sports, no PASM, 7/7mm spacers.

Originally Posted by eganraC

Thanks, cant really see that much of a difference from that angle but appreciate the post. Im hoping eliminate 90% of the gap.

Basically, im looking for this height(photoshopped).

Originally Posted by Code

That looks pretty spot on with what I've seen in person.

Originally Posted by Swalker

Ill sell you my techart set out of my 2016 gts cab if you want them . I was also debating h&r but went with techart , I believe the drop is not as low with the techart, better ride too. Had them installed for about 2 months . Still in box. $300.00.

Originally Posted by eganraC

Thanks, cant really see that much of a difference from that angle but appreciate the post. Im hoping eliminate 90% of the gap.

Basically, im looking for this height(photoshopped).

Originally Posted by bogdan_p

This one might be better without the strange lighting.