When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Why did you replace the O2 sensor? were you getting a CEL? or just preventative? what interval do you change them?
Thanks
I got a CEL codes P0154 and P1119. I first checked the wires connection before changing just the one sensor. Car has 115k miles. I read somewhere they typically need replacing around 90-100k, so I expect to have to do the other three soon.
I added a USB port for power. I searched high and low for a rectangular USB port --- circular ones are everywhere, but rectangular ones are super hard to find.
The last couple days I have been working on the 95', I buffed it to a nice shine with a cut, polish, wax.
I also changed the radio from the CR-1 to a Continental unit with bluetooth.
Took the car to pass smog, it passed with flying colors.
Installed a CF RS heater bypass pipe in the garage today, it's getting way too hot here in Phoenix to work on the car, but the Fister II's are coming tomorrow!
Well done! I see you have removed the sills as well...
Good eye Jlaa,
I just got a nice set of stock sills courtesy of KMass993. They're at Wheel Dynamix being wrapped in XPel at present. Slowly pulling it all together, and enjoying every moment.
08-08-2016, 08:22 AM
