boman993

sold

TomTiddler

These are from my 2004 Turbo Cab. They look great but I prefer the handling on 18's, thus the sale. They're in good condition, no dings no dents.

I'm in Waterloo, Ontario and can deliver a reasonable distance (say Toronto, or London).

Asking $1000 just to get them out of my backyard.

There are Pirelli's on the rims, but I would not consider using them!

PM with any questions, or for pics (I cant figure out how to upload a pic to this forum)

Update: Wheels are 19x8.5 front, 19x11 rear, don't know the offsets but they fit a 996 turbo perfectly (mine's substantially lowered). Consensus seems to be they won't fit a narrow body. Sigh.

Ian

(They're on the car on the left of this message)

Update:: Photos in an album called "OZ Racing Wheels". Enjoy!!

928nut

Virtually brand new - test fitted on my car for about 2 wks.

Should fit '78 to '85

Built by Dave Lomas @ Motorsport LLC in Utah. Very well built piece, nice welds and flanges.

Would like to get $250 for it.

EDoyle

I have a few more parts for sale that I no longer need since I sold my 996. All the parts are brand new.

-Porsche 996 GT3 center console delete kit NEW black $180
http://montreal.kijiji.ca/c-autos-et...AdIdZ473451347

-Oem Porsche 997 short shift console $350
http://montreal.kijiji.ca/c-autos-et...AdIdZ473450138

-Porsche 997 GT3 brake ducts for 996/997
http://montreal.kijiji.ca/c-autos-et...AdIdZ473446749

BruceP

SOLD - Thanks for all the interest. GL to those still hunting!

Ocean Blue on Graphite, approximately 104,000km on its original motor, this car has been a four season daily driver with impeccable mechanical maintenance (all service records included). A major preventative maintenance was completed in 2010, including installation of an LNE double row IMS bearing, new radiators and hoses, a new water pump, and new Bilstein HD shocks. The AOS has also been replaced. The car uses no oil and runs like a scalded cat (no actual cats were harmed in this metaphor).

The car presents as clean, simple and unmodified, but includes many extras. Mechanical modifications include an EVOMs intake (OE intake is available) and exhaust and IPD plenum, supported by a REVO flash, Porsche RS motor mounts and short shift kit. Inside, it features Porsche sport seats, three-spoke wheel, GT3 console delete (original console available), and an Alpine stereo with iPhone connectivity and Boston Acoustics amp and speakers hidden in factory enclosures (original head unit and amp are available). The exterior is unmolested, except for Porsche Litronic retrofits and colour keyed bumperettes. All of this work was professionally done (audio by Kromer, mechanicals and maintenance by Engineered Automotive), because I cannot be trusted with a screwdriver.

Michelin PS2s come on the factory Turbo-style rims, and a second set of aftermarket rims with Pirelli Snowsport 240s are included.

This car is not a garage queen, and I'm aware that 996 values are all over the place right now. But I stand by the care this car has received, and I do think that the extras have some value to the right buyer, so I'm asking $22,000.

Serious inquiries only would be appreciated. I can be reached by email through this site. Thanks for reading this!

993GT

^looks good! I will show to a friend who is slowly starting to shop for a new toy ....GLWS

BruceP

Thank you

993GT

brand new in box Goodridge Stainless-steel braided brake lines(4) for all 993 applications 1995-1998 $110??? (new at Tirerack $118+shipping,taxes etc...) make an offer....may be able to deliver to London, GTA, Brantford, KW, Simcoe areas...

w00zie

Just bought these for this summer, but looks like i'll be spending a good chunk of my summer down in Dallas w/o my car so putting them up for sale so they don't go to waste

Brand new 19" Hoosiers R6 (not heat cycled yet), 235/35/19 and 295/30/19 on a set of Ruger Mesh 19" rims, Narrow Body fitment

As mentioned tires are brand new, never used. Rims are in great condition, a few little marks but no major curb rash or damage

Asking $2300 obo

Located in Oakville

JonasJ

Hi Guys,

997.2 Carrera (S)(GTS) Centre Muffler

not sure if anyone has a need for this but I have it laying around.
Part B on the 2nd picture, as far as I know its the same on all Carreras

https://rennlist.com/forums/parts-ma...l#post10407629

jasonlp

Performance:
Transmission: shimmed factory LSD rebuilt 2012, oil cooler and S2 R&P: complete rebuild 2009
New transmission mount, urethane 3M window weld filled - Kelly Mount 2012
Garrett GT3076R - 60mm 84 trim turbine, 76.2mm, 56 trim compressor, T04E compressor housing and .63 turbine housing 2008
JME cs-16 camshaft 2009
Vi-Pec V44 ECU, full sequential injection 2010
J&S - individual cylinder knock detection with on the fly timing correction 2010
LS2 coil packs 2010
Kingsborne spark plug leads w/ suppressed BERU boots 2010
100lb Bosch EV 14 Injectors 2010
KEP1 pressure plate, Sachs Cup disk and Fidanza flywheel 2012
Torque tube rebuild with 4 Constantine SUPER bearings 2012
Widefire head gasket 2009
Oil pan baffle kit 2010
88 Turbo S – hubs, spindles 2010
88 Turbo S – Front Calipers 2010
86 Turbo front larger piston calipers on rear
CEP billet fuel rail and lines 2010
B&B headers 2005
Fireball coated the headers for 2100'c+XMC interior coating reduces heat 70% 2010
Aeromotive adjustable Remote FPR 2010
2nd oil cooler front mounted KISS 2010
Walbro GSL 392 high volume fuel pump 2010
38mm Tial wastwgate 2011
EGT probe 2010
Lindsay racing stage 1 intercooler 2008
custom 3" downpipe thermal wrapped 2008
custom cross-over 2010
Fireball coated cross-over for 2100'c+XMC interior coating reduces heat 70% 2010
Speed force racing full 3" ss exhaust + quite flow muffler 2008
Evolution motorsport diverter valve 2002
short shifter at trans 1989
Racer's Edge control arm's 2008
Racer's Edge adjustable camber plates 2010
Racer's Edge trailing arm bolts 2012
Elephant racing front rear A-arm monoball's 2010
Elephant racing trailing arm monball's 2011
Elephant racing PolyBronze spring plate bearings 2012
KLA strut brace 2010
Bilstein Escort Cup coilover suspension, Front: 450lbs Rear: 650lbs T-bars delete - 2012
Bilstein rear body-end converted to spherical bearing ID .5" - 2012
New from Porsche M030 968 front sway bar 30mm 2009
New from Porsche M030 968 adjustable rear sway bar 19mm 2009
SS and coated brake lines 2009
968 air brake deflectors 2010
Frozen rotors slotted front 2010
Frozen rotors slotted rear 2012
Power steering rack rebuilt 2010
New factory radiator 2010
Street pads: Pagid street 2010
Track pads: Performance friction 01 front 97 rear 2010
K&N cone air filter 2010
skid plates 1989
Saikou michi oil catch can 2008 - Always dry and Empty
Venturi delete 2008
New factory water pump 2009
New updated power steering reservoir hose 2009
CV joints rebuilt 2012
Locking stage 8 CV joint bolts 2010
Gear reduction starter 2010
Iceshark alternator, starter, battery and headlight cables 2010
Hella Vision Plus H4 headlights 2007
A/C Delete 2010
New rebuilt Bosch alternator 2010
New knock sensor 2010
Laust manifold extension 5 port 2011
Sway bar stiffeners support brackets 2010
Rear wheel studs 52mm 2011
Reinforced drivers side swaybar frame-rail mount point 2011
New from Porsche alum Clutch&Brake Master&Slave cylinders 2012
New from Porsche Brake reservoir and hose - 2012
Huntly Racing 2.5" IC to Turbo pipe 2012
New Corbeau 3" 5 point cam lock FIA approved harness 2012
Brey-Krause harness bar

Trailer Hitch 1989
Tire Trailer with tool box 2010


Cold compression test:
Jan 2012 - 130 130 130 130

DE Seats:
Momo racing seat FIA expired


Mustang Dyno
350rwhp 340ft-lbs torque at 19psi 2012

Dynopak:
355rwhp 344ft-lbs torque at 19psi 2011


Wheels:
Phonedials: Front 16/8/225 Rear 16/8/225
Special Edition Cup 4: Front 17/9/255 Rear 17/9/255

Tires:
Street: Dunlop Direzze Sport Z1 star spec
Track: Dunlop Direzze Sport Z1 star spec



Interior:
Clarion maxvd675 head unit 2007
2x Boston Accoustics tweeters 1986
2x 300 watt Earthquake Sound door speakers 2007
2x Infinity Kappa crossover units 2012
600 watt Earthquake Sound amp 2007
600 watt lowprofile Earthquake Sound sws-12" sub 2007

$19,500

993GT

Thinking about selling my brand-new in-box TR Motorsports/ENKEI forged wheels, light, strong, beautiful 18x10 front et40/18x12 rear et45...$make an offer!

TomTiddler

These are from my 2004 Turbo Cab. They're Superleggera III OZ Racing Tuner System. They look great but I prefer the handling on 18's, thus the sale. They're in good condition, no dings no dents.

I'm in Waterloo, Ontario and can deliver a reasonable distance (say Toronto, or London).

Asking just $750 just to get them out of my backyard.

There are Pirelli's on the rims, but I would not consider using them!

PM with any questions or offers.

Update: Wheels are 19x8.5 front, 19x11 rear, don't know the offsets but they fit a 996 turbo perfectly (mine's substantially lowered). Consensus seems to be they won't fit a narrow body. Sigh.

Ian

(They're on the car on the left of this message)

Update:: Photos in an album called "OZ Racing Wheels". Enjoy!!

__________________

mmdma

Hi Im interested can you shoot me an email at ber929@gmail.com?? thanks

Speedyellow993

If still available I'll take them if you'll drop off in Toronto.

PM me with Payment Details.