When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BNIB: Essex Apex Racing J-Hook Rotors for 991.2 GT3
I've got a set of brand new in box front and rear Essex/AP Racing J-Hook rotors available for the 991.2 GT3 (replacement for oem steel brake rotors). Asking $3600CAD for all four corners. If you buy these new, they'll cost you over $3600US plus shipping/taxes.
Located in Oakville, ON.
The boxes are still sealed as you can see in the picture below.
-SOLD-Michelin Pilot Sport Cup 2 Tires for Porsche 997 Wide Body
- SOLD- Set of 4 staggered front and back. Michelin Pilot Sport Cup 2 Tires for Porsche 997 Wide body aka turbo , C4S, and others. May also fit other Porsches. Fronts are 235/35R19. Rear are 305/30R19. Z rates. Date of manufacture is 2018. Only 1 season on them. Lots of life left. Both tires are 5/32nd, down from 7.2/32nd when new. Many people consider these the best high performance street tire on the market.Selling for $1000 obo. These will cost you 1700+TX new. Pickup only. Edit: Located in Brampton Ontario.
Last edited by thewitchdokta; 05-23-2021 at 04:23 PM.
Reason: Forgot location. Lower price, sold
1989 BMW 3-Series Racecar M50 Engine AER/Champcar/BMW Club/VARAC/HPDE
--- $18,000 USD ---
For sale is our M50-powered E30 BMW racecar, professionally built for racing in endurance or sprint series, but primarily used for HDPE over the past few years with a single endurance race successfully under its belt. This car has been meticulously maintained and really deserves to see more track time! It’s an incredibly balanced car that
The previous owner had the car repainted (2015) including the interior, which uses Por15 rust-proof paint. The full cage was built by Sebastien at “Built by Seb”, builder of multiple CTCC winning cars (www.facebook.com/builtbyseb/). Some minor blemishes (racing character) on the exterior, and the paint is peeled on the roof where a number panel was removed.
The car is very quick, running 1:37 at Mosport/CTMP, x:xx at Tremblant, x:xx at Watkins Glen, and 2:26 at Calabogie. It’s well balanced, handling is predictable, and it pulls strong out of the corners. Well suited for anyone interested in a track-focused car for DE, or to take racing in endurance or a sprint series.
Mechanicals:
Engine is an M50 Inline-6 with M3 cams, rigid mounts, Turner motorsports ECU. Engine was refreshed in 2016, pulls very strong. 5-speed ZF320 transmission, shifts smoothly. Z3 shifter. Spare transmission included with sale. Refreshed limited slip differential (4.10) installed in 2020 (new bushings). Spare differential included with sale, needs rebuild (damaged gears). BEHR radiator. Run with deionized water & redline water wetter. Coolant currently in car for winter storage. New water pump and high-temp thermostat installed (2018). Brakes: stock calipers (rebuilt) currently with PFC08 pads and Castrol SRF fluid. Spare rotors and pads included with car. Front brake ducts for added cooling. Suspension: Bilstein B8 shocks, Turner springs. New rear subframe with added support and bushings installed (2018). 2 sets of 15x8 wheels, Hankook RS-4 tires (one set fresh with only one track weekend). All fluids changed regularly Alignment and baseline setup done by Jay @ Powersports Garage at Calabogie Motorsports Park. Jay is well known for having done setups for multiple race winning E30’s
Interior:
Original dash, all-new electrical with Longacre switch panel, custom dash panel for master e-switch and guages Momo steering wheel with quick release OMP HTE-R halo seat, adjustable on sliders Seatback brace for driver Fire suppression system, new extinguisher bottle installed in 2019 Schroth enduro 6-pt harness (driver seat) - 2019 expiry Cobra Suzuka passenger seat Schroth harness for passenger seat (expired) Window net (new 2019) goPro mount with switched power supply New battery (2019)
Spares:
ZF320 transmission 3:73 Differential (needs rebuild) Rear subframe and bushings Second set of wheels with tires (Hankook RS4, used) Multiple sets of new rotors and PFC08 pads E30 trunk lid Oil filters (2) Various other parts
For sale is our M50-powered E30 BMW racecar, professionally built for racing in endurance or sprint series, but primarily used for HDPE over the past few years with a single endurance race successfully under its belt. This car has been meticulously maintained and really deserves to see more track time! It’s an incredibly balanced car that
The previous owner had the car repainted (2015) including the interior, which uses Por15 rust-proof paint. The full cage was built by Sebastien at “Built by Seb”, builder of multiple CTCC winning cars (www.facebook.com/builtbyseb/). Some minor blemishes (racing character) on the exterior, and the paint is peeled on the roof where a number panel was removed.
The car is very quick, running 1:37 at Mosport/CTMP, x:xx at Tremblant, x:xx at Watkins Glen, and 2:26 at Calabogie. It’s well balanced, handling is predictable, and it pulls strong out of the corners. Well suited for anyone interested in a track-focused car for DE, or to take racing in endurance or a sprint series.
Mechanicals:
Engine is an M50 Inline-6 with M3 cams, rigid mounts, Turner motorsports ECU. Engine was refreshed in 2016, pulls very strong. 5-speed ZF320 transmission, shifts smoothly. Z3 shifter. Spare transmission included with sale. Refreshed limited slip differential (4.10) installed in 2020 (new bushings). Spare differential included with sale, needs rebuild (damaged gears). BEHR radiator. Run with deionized water & redline water wetter. Coolant currently in car for winter storage. New water pump and high-temp thermostat installed (2018). Brakes: stock calipers (rebuilt) currently with PFC08 pads and Castrol SRF fluid. Spare rotors and pads included with car. Front brake ducts for added cooling. Suspension: Bilstein B8 shocks, Turner springs. New rear subframe with added support and bushings installed (2018). 2 sets of 15x8 wheels, Hankook RS-4 tires (one set fresh with only one track weekend). All fluids changed regularly Alignment and baseline setup done by Jay @ Powersports Garage at Calabogie Motorsports Park. Jay is well known for having done setups for multiple race winning E30’s
Interior:
Original dash, all-new electrical with Longacre switch panel, custom dash panel for master e-switch and guages Momo steering wheel with quick release OMP HTE-R halo seat, adjustable on sliders Seatback brace for driver Fire suppression system, new extinguisher bottle installed in 2019 Schroth enduro 6-pt harness (driver seat) - 2019 expiry Cobra Suzuka passenger seat Schroth harness for passenger seat (expired) Window net (new 2019) goPro mount with switched power supply New battery (2019)
Spares:
ZF320 transmission 3:73 Differential (needs rebuild) Rear subframe and bushings Second set of wheels with tires (Hankook RS4, used) Multiple sets of new rotors and PFC08 pads E30 trunk lid Oil filters (2) Various other parts
For Sale - Akrapovic Slip-On Race Centre Exhaust 991.2 GT3
Sold my 991.2 GT3. Couple parts left, this and Eddies seat protectors (posting to come for that).
Akrapovic was used for roughly 6,600 km.
Akrapovic Slip-On Race Centre Mufffler with Tips. Great condition, not used in snow/winter and barely used in the wet. Extremely lightweight in titanium, well made and sounds great. Amplifies the OE sound and retains the character of the engine while adding volume and a boost in sound quality. This mod allows you to retain valve control. You can add link pipes later if you want even more volume and race car sound. I had the link pipes as well, sound is epic. I have exhausts on a number of cars and Akrapovic on two of them. Hands down quality system that retains car's OE engine character, ie doesn't make a GT3 sound full of bass etc.
This is advertised by Akrapovic for 991.2 GT3 but may work with 3RS as well, verify your application with Akrapovic.
Akrapovic Race Slip-On Centre Muffler including tips - $3300 CAD ($4850 + tax CAD new) + shipping (may include shipping depending on location)
FS - HRE FF15 Tarmac 20" Rims + Michelin Pilot Sport 4S w TPMS
For sale is a set of 20" HRE FF15 Tarmac Finish wrapped in PS4S with TPMS.
HRE Flow Form FF15 20" Rims
• 20 x 8.5 +50 (Front)
• 20 x 10 +40 (Rear)
• Tarmac (black) finish
• 10/10 condition
• Original HRE caps
• Please check fitment but these should fit any 718 and 981 Boxster and Cayman (non-Spyder/non-GT4)
Michelin PS4S
• 235/35ZR20
• 265/35ZR20
• OEM 718 TPMS included
• Very good condition; quite a bit of life left; 6 to 7/32 treads left
• Manufactured end of 2016
$2,500 CAD obo including tires! Prefer local pick up (I'm in the Greater Toronto Area). PM with questions/offers!
For sale is a set of 20" HRE FF15 Tarmac Finish wrapped in PS4S with TPMS.
HRE Flow Form FF15 20" Rims
• 20 x 8.5 +50 (Front)
• 20 x 10 +40 (Rear)
• Tarmac (black) finish
• 10/10 condition
• Original HRE caps
• Please check fitment but these should fit any 718 and 981 Boxster and Cayman (non-Spyder/non-GT4)
Michelin PS4S
• 235/35ZR20
• 265/35ZR20
• OEM 718 TPMS included
• Very good condition; quite a bit of life left; 6 to 7/32 treads left
• Manufactured end of 2016
Looking to get $3,500 CAD obo. Prefer local pick up (I'm in the Greater Toronto Area). PM with questions/offers!
I’m not a wheel figment expert so best to check in the Panny forum. My unsubstantiated guess is that they might. Offset for stock Panny is higher but not by a whole lot. Width and diameter otherwise seem to fit.
FS BNIB - RGS (Radiator Grille Store) Front Grille Set of 3 - 981 Boxster Cayman GTS
SOLD - thank you
For sale is a set of brand new front grills for 981 Boxster/Cayman GTS bought directly from the Radiator Grille Store (RGS) a month ago.
RGS Front Grills
• Condition is Brand New (still in original packaging and box) - took them out for pictures - 10/10
• Never used or installed
• From RGS: These front (left, right and center) radiator grilles fit Porsche Boxster and Cayman 981 GTS 2013-2016. This is for a set of three grilles. Powder coated mesh radiator screens that protect from leaves and road and track debris
• 3M mounting tape (required for center install) included
SOLD Prefer local pick up (I'm in the Greater Toronto Area). PM with questions/offers!
05-08-2021, 08:01 AM
997.1 911 Header to block gaskets
