When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling a set of Champion RS98 Wheels spec'd for 997 NB, or WB with rear spacers. These are forged wheels, making them both lighter AND stronger than any cast or flow formed wheels. https://www.championmotorsport.com/product-p/cms-rs98.htm
Wheel Specs: F: 19" x 9" et 53 R: 19" x 12" et 63 Wheels pretty much mint and flawless. No curb rash whatsoever.
Just the wheels. There are NO tires included.
Pictures of the red C4S are of the actual wheels on a stock height 997 C4s w/ spacers.
Other images are taken from the net to show how they can also look on lowered cars with some better fitment.
Asking $3500 CAD OBO plus shipping/handling and PP Fees (if applicable)
I will include the coloured Porsche Crest as well. Actual wheels Actual wheels Photo taken from internet Photo taken from internet Photo taken from internet
FS: Porsche Genuine Cabin Air Filter and Oil Filter (991/981/718)
* * * s o l d * * *
$xx for both Cabin Air Filters as listed below. Brand new, 40% OFF. Ordered by mistake for my 997.
Fits all 991 911 / 911 Turbo / GT3 models (2012-2019) and all 981/718 Boxster and Cayman models (2012-2019). Pricing below is from a Porsche Dealer in Toronto.
991-573-623-00 Cabin Air Filter $94.24 (New PN is 9P1-819-631)
991-572-371-00 Air Cleaner $24.52
$xx of oil filter with housing, drain plug and o-ring. Brand new, and being offered as a set only as listed below at 33% OFF.
Fits all 987.2/981 Boxster and Cayman models (2009-2016). Pricing below is Porsche Dealer price in Toronto.
9A1-107-024-00 Oil Filter Housing $46.78 (New PN is 0PB-115-403-A)
900-219-020-31 Oil Drain Sealing Plug $10.37
900-123-106-30 Drain Plug O-Ring $1.99
Last edited by Lemikson; 09-04-2020 at 11:40 AM.
Reason: typo
FS: 2012 Featherlite 3110 17' aluminum open trailer
Selling a 2012 Featherlite 3110-17 all-aluminum open trailer. Doesn't need much explanation, excellent lightweight car hauler for your track toy. Selling because I'm moving up (down?) to an enclosed trailer.
17' 6" long, 8' 6" wide, 79" fender to fender
0 km on brand new rubber
Bearings done June 2019
Includes spare tire, rim recently refinished
Includes wheel/tire rack, lowered from factory height for easier loading/unloading
Jerry can support bracket up front
All lights working but brake indicators do not exactly match as one was replaced by previous owner
Some bumps and bruises but overall great condition, nothing bent or broken
2007 Audi S6
Over $25000 CAD in modifications
v10 engine 5.2 L (same engine that was essentially used in the Lamborghini Gallardo)
Over 500hp/500tq
Full length JHM custom headers ($10000)
JHM exhaust with HJS high flow cats ($4000)
Forged Alloys 20" forged lightweight wheels ($5000)
RS6 OEM Exclusive alcantara dash Imported from Germany with OEM RS6 black bezel surround ($2000)
H&R coilovers ($2000) lowered
JHM LWCP and JHM intake spacers ($1000)
JHM ECU and TCU tune ($2000)
Carbon trim
OEM sport seats
No test pilots
225k km
$23999 CAD
exhaust video https://www.youtube.com/watch?v=s-XXLZoeyHU
Anyone with a Akrapovic 991.2 GT3 / RS center muffler (not the bypass) interested in trading for a Dundon Lifetime Loud muffler with ~1,000km? You'll want the Dundons if you're thinking of running a race header, as the Akras will crack like the stock mufflers. GTA preferred.
Those disks are garbage...they have cracks most likely from track use. I just threw out a set last week that I took off my car. thickness was fine but cracked...from track.
Those disks are garbage...they have cracks most likely from track use. I just threw out a set last week that I took off my car. thickness was fine but cracked...from track.
Those cracks are exactly why I switched from drilled rotors to slotted ones. However, these small cracks are considered normal unless they reach the edge of the rotor or connect two drilled holes.
Those disks are garbage...they have cracks most likely from track use. I just threw out a set last week that I took off my car. thickness was fine but cracked...from track.
Hmm... LOL... If you dont track the car they look fine. Mine are exactly like that after my last track day which was about 8 years ago Yes I have a set of brank new OEM's in the garage, but they are fine and have been fine for all these years. Granted I dont daily drive, but I would not throw them in the garbage bin either for normal driving... Hey that is just me and my opinion might not suit everyone.
rotors are cheap enough that it doesn't make sense to put used cracked ones on IMO. Let alone trying to sell them, I would suggest free for a short term fix for someone.
rotors are cheap enough that it doesn't make sense to put used cracked ones on IMO. Let alone trying to sell them, I would suggest free for a short term fix for someone.
No argument about weighing purchasing used vs new. While a set of 4 Turbo/C4S OEM disks ( not Zimmerman) is about $1500 so I would not call it exactly cheap, my point is that unless you track the car, if you have these small cracks on the disks like I have in my car, there is no need to replace them IMO. Hope that clarifies my point. Cant make any comments on the value proposition of the OP selling these disks. I have my thoughts but I dont think it would be appropriate to comment.
Alright folks.
Fire sale time for these as they need to go.
$2500 (Cad$ of course) SHIPPED anywhere in Canada.
Prefer Emt as there are no fees. But if you want to send PayPal, please cover the fees.
I'm fine with sharing personal/business/facebook/LinkedIn info that should make the buyer feel comfortable with whichever method of payment.
If you are local or pickup up locally, lmk and we can figure out an even better price since shipping not needed.
This is a smoking hot price guys, don't sleep on it!
Originally Posted by E30toF30
Selling a set of Champion RS98 Wheels spec'd for 997 NB, or WB with rear spacers. These are forged wheels, making them both lighter AND stronger than any cast or flow formed wheels. https://www.championmotorsport.com/product-p/cms-rs98.htm
Wheel Specs: F: 19" x 9" et 53 R: 19" x 12" et 63 Wheels pretty much mint and flawless. No curb rash whatsoever.
Just the wheels. There are NO tires included.
Pictures of the red C4S are of the actual wheels on a stock height 997 C4s w/ spacers.
Other images are taken from the net to show how they can also look on lowered cars with some better fitment.
Asking $3500 CAD OBO plus shipping/handling and PP Fees (if applicable)
I will include the coloured Porsche Crest as well. Actual wheels Actual wheels Photo taken from internet Photo taken from internet Photo taken from internet
Alright folks.
Fire sale time for these as they need to go.
$2500 (Cad$ of course) SHIPPED anywhere in Canada.
Prefer Emt as there are no fees. But if you want to send PayPal, please cover the fees.
I'm fine with sharing personal/business/facebook/LinkedIn info that should make the buyer feel comfortable with whichever method of payment.
If you are local or pickup up locally, lmk and we can figure out an even better price since shipping not needed.
This is a smoking hot price guys, don't sleep on it!
I have these wheels on my Cayman, they are awesome. Strong, light, and easy to clean!
08-31-2020, 04:54 PM
Yes I have a set of brank new OEM's in the garage, but they are fine and have been fine for all these years. Granted I dont daily drive, but I would not throw them in the garbage bin either for normal driving... Hey that is just me and my opinion might not suit everyone.
