When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi everyone , new here. I’m helping my mother sell her 911 Turbo Cab. She’s been a Porsche lady her whole life but now she hardly drives it (she’s 70). She’s tasked me to help her sell it. It’s on consignment at Porsche Oakville. Link here. Asking is $60,409 or best offer. I figure some of you or your friends may see this car at the dealership and have questions about it. Happy to answer them.
Cleaning out the house, need to get rid of some old magazines. I have Excellence magazines, most are older. Provinz magazines from the last six years and Panorama 2018 and older. There are a few European Car, Sports Car and Christophorus magazines mixed in. Approximately 100 - 150 magazines.
Seeing if anyone wants them before I throw them in the trash. Bring me a Timmies and they are yours. Wifey tossing them Friday.
Last edited by 911porschefan; 08-16-2020 at 02:38 AM.
Cleaning out the house, need to get rid of some old magazines. I have Excellence magazines, most are older. Provinz magazines from the last six years and Panorama 2018 and older. There are a few European Car, Sports Car and Christophorus magazines mixed in. Approximately 100 - 150 magazines.
Seeing if anyone wants them before I throw them in the trash. Bring me a Timmies and they are yours. Wifey tossing them Friday.
Michelin Pilot Super Sport tires – 235/35R19 and 295/30R19 Extra Load
* * * s o l d * * *
Michelin Pilot Super Sport Extra Load Ultra-High Performance Summer tire set in Porsche 911 sizes.
Fronts are: 235/35R19; 8.5/32 remaining tread (new are at 10/32 tread).
Rears are: 295/30R19; 8.5/32 remaining tread (new are at 9/32 tread).
Asking **** for the whole set or best reasonable offer.
Sizes will fit many 911 applications. Please check your specs for applicability.
Last edited by Lemikson; 08-19-2020 at 12:40 PM.
Reason: typo
Fikse forged 3-piece racing wheels for 987 fitment. Wheel model is the Profil-10. 18x8.5 fronts & 18x10 rear. Offsets are unknown as they don't stamp them on the wheel, but they're specifically made for the 987 platform. These are coming off my RACE CAR therefore THEY LOOK SMELL AND TASTE LIKE WHEELS THAT CAME OFF A RACE CAR.
-
All 4 wheels, the inner barrels are slightly out of round. The wobble isn't bad and the wheels balance out with weights. No damage, cracks or bends. They can be used as-is and do not require any immediate repair, just providing full disclosure. All 3-piece forged wheels come out of round eventually when using them for track duty & racing, normal stuff.
Replacement inner barrels direct from Fikse are $250 USD each if the buyer wanted to replace them with new. Alternatively for $100 per wheel, a local rim repair shop can straighten the wheels and make them perfectly round again very easily. Or just leave them as-is, that's what I did and I was fine with them
The wheels have (had) a polished finish, and they look exactly as you would expect a polished wheel to look coming off a race car - stained with brake dust and ugly. That said, the wheel centers and outer barrel are in good physical shape and can be refinished to look new again by any local wheel repair or powder coating shop at low cost
From 10 feet away, as per the photos attached, they look great. But trust me, up close they definitely look like racing wheels!
Price new from Fikse.com is $1,250 USD per wheel = $5,000 USD + shipping for the set of 4. I am asking $2,000 CAD for the set as-is. Would make excellent racing rain wheels as-is, or buyer can rebuild them to be & look new again for half the cost of buying new.
Payment by e-transfer only, and wheels can be picked up in Milton, Oakville or Markham. They'll also be at Mosport this weekend and available for viewing / purchase.
Fikse forged 3-piece racing wheels for 987 fitment. Wheel model is the Profil-10. 18x8.5 fronts & 18x10 rear. Offsets are unknown as they don't stamp them on the wheel, but they're specifically made for the 987 platform. These are coming off my RACE CAR therefore THEY LOOK SMELL AND TASTE LIKE WHEELS THAT CAME OFF A RACE CAR.
-
All 4 wheels, the inner barrels are slightly out of round. The wobble isn't bad and the wheels balance out with weights. No damage, cracks or bends. They can be used as-is and do not require any immediate repair, just providing full disclosure. All 3-piece forged wheels come out of round eventually when using them for track duty & racing, normal stuff.
Replacement inner barrels direct from Fikse are $250 USD each if the buyer wanted to replace them with new. Alternatively for $100 per wheel, a local rim repair shop can straighten the wheels and make them perfectly round again very easily. Or just leave them as-is, that's what I did and I was fine with them
The wheels have (had) a polished finish, and they look exactly as you would expect a polished wheel to look coming off a race car - stained with brake dust and ugly. That said, the wheel centers and outer barrel are in good physical shape and can be refinished to look new again by any local wheel repair or powder coating shop at low cost
From 10 feet away, as per the photos attached, they look great. But trust me, up close they definitely look like racing wheels!
Price new from Fikse.com is $1,250 USD per wheel = $5,000 USD + shipping for the set of 4. I am asking $2,000 CAD for the set as-is. Would make excellent racing rain wheels as-is, or buyer can rebuild them to be & look new again for half the cost of buying new.
Payment by e-transfer only, and wheels can be picked up in Milton, Oakville or Markham. They'll also be at Mosport this weekend and available for viewing / purchase.
Oh man if these were 997 wb fitment I'd be all over them. Gorgeous wheels!!
Fikse forged 3-piece racing wheels for 987 fitment. Wheel model is the Profil-10. 18x8.5 fronts & 18x10 rear. Offsets are unknown as they don't stamp them on the wheel, but they're specifically made for the 987 platform. These are coming off my RACE CAR therefore THEY LOOK SMELL AND TASTE LIKE WHEELS THAT CAME OFF A RACE CAR.
-
All 4 wheels, the inner barrels are slightly out of round. The wobble isn't bad and the wheels balance out with weights. No damage, cracks or bends. They can be used as-is and do not require any immediate repair, just providing full disclosure. All 3-piece forged wheels come out of round eventually when using them for track duty & racing, normal stuff.
Replacement inner barrels direct from Fikse are $250 USD each if the buyer wanted to replace them with new. Alternatively for $100 per wheel, a local rim repair shop can straighten the wheels and make them perfectly round again very easily. Or just leave them as-is, that's what I did and I was fine with them
The wheels have (had) a polished finish, and they look exactly as you would expect a polished wheel to look coming off a race car - stained with brake dust and ugly. That said, the wheel centers and outer barrel are in good physical shape and can be refinished to look new again by any local wheel repair or powder coating shop at low cost
From 10 feet away, as per the photos attached, they look great. But trust me, up close they definitely look like racing wheels!
Price new from Fikse.com is $1,250 USD per wheel = $5,000 USD + shipping for the set of 4. I am asking $2,000 CAD for the set as-is. Would make excellent racing rain wheels as-is, or buyer can rebuild them to be & look new again for half the cost of buying new.
Payment by e-transfer only, and wheels can be picked up in Milton, Oakville or Markham. They'll also be at Mosport this weekend and available for viewing / purchase.
Wow, this is beautiful set of Fikse 10s and even better price point.
Who ever buys this set just bring them to John at Union Rim and he will make them look and be straight/true as new for $200 per wheel!
Great offering!
GLWS OP.
Fikse forged 3-piece racing wheels for 987 fitment. Wheel model is the Profil-10. 18x8.5 fronts & 18x10 rear. Offsets are unknown as they don't stamp them on the wheel, but they're specifically made for the 987 platform. These are coming off my RACE CAR therefore THEY LOOK SMELL AND TASTE LIKE WHEELS THAT CAME OFF A RACE CAR.
-
All 4 wheels, the inner barrels are slightly out of round. The wobble isn't bad and the wheels balance out with weights. No damage, cracks or bends. They can be used as-is and do not require any immediate repair, just providing full disclosure. All 3-piece forged wheels come out of round eventually when using them for track duty & racing, normal stuff.
Replacement inner barrels direct from Fikse are $250 USD each if the buyer wanted to replace them with new. Alternatively for $100 per wheel, a local rim repair shop can straighten the wheels and make them perfectly round again very easily. Or just leave them as-is, that's what I did and I was fine with them
The wheels have (had) a polished finish, and they look exactly as you would expect a polished wheel to look coming off a race car - stained with brake dust and ugly. That said, the wheel centers and outer barrel are in good physical shape and can be refinished to look new again by any local wheel repair or powder coating shop at low cost
From 10 feet away, as per the photos attached, they look great. But trust me, up close they definitely look like racing wheels!
Price new from Fikse.com is $1,250 USD per wheel = $5,000 USD + shipping for the set of 4. I am asking $2,000 CAD for the set as-is. Would make excellent racing rain wheels as-is, or buyer can rebuild them to be & look new again for half the cost of buying new.
Payment by e-transfer only, and wheels can be picked up in Milton, Oakville or Markham. They'll also be at Mosport this weekend and available for viewing / purchase.
Fresh photos from this weekend with tires dismounted. After cleaning them up, I can confirm that the wheel centers are in very, very good condition. They have the original machined & cleared finish from Fikse which is still in as-new condition to my eye. Only the polished lips need to be cleaned up, which any rim repair shop can do easily. There is no rash or damage to the polished lips, just oxidation and surface stains from brake dust.
Get yourself a super lightweight set of 3 piece forged wheels that cost $5k USD new, for $2k cad!
100% straight and true as they just have been checked for a bare rim runout on the top of the line Hunter Road Force Elite GSP9700 wheel balancer.
Price: asking or best reasonable offer.
· Cosmetically in a fairly good condition. Used exclusively as a track wheel set for the last 6-7 years. Zero curb rash but there are some nicks and some paint chips/dents in a few spots. I would give them 7.5-8.0 / 10 mark. Could be used as a winter wheel set, track set or as is. Or, just send them to Union Rim to make them look like new as only refinish at $120 per wheel is all is needed.
· Will fit all narrow body 997 911. Can fit many other 911 models. Please check your specs for applicability.
Last edited by Lemikson; 10-29-2020 at 01:42 PM.
Reason: typo
Front mats for 997 non-Bose.( part # 987 044 800 93)... Velcro pads on the back. Excellent condition. $50 can + shipping or possible meet up within GTA
Prefer to sell as a bundle and not individually. All are new items.$100 can + shipping obo
Spin on oil canister, oil filter with gasket and crush ring, cabin air filter, idle control switch and 101 projects
sold
08-10-2020, 02:39 PM
