If PFC 97's are going away, which compound to use?
#1
NASA Racer
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've used the 97's forever. Now that they are going away which PFC compound is most similar?
All I have been able to find that is available for our cars is the 06 or 08 in front and 08 in rear.
car is D stock 82 911
would like hard initial bit and good modulation. not overly concerned about wear.
All I have been able to find that is available for our cars is the 06 or 08 in front and 08 in rear.
car is D stock 82 911
would like hard initial bit and good modulation. not overly concerned about wear.
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sean:
Try the 08s front and rear. Would work well on an SC/Carrera. We have both in stock.
Try the 08s front and rear. Would work well on an SC/Carrera. We have both in stock.
Trending Topics
#8
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, the 06 will be phased out. We have a few sets of 06 on the shelf front and rear as well for the SC/Carrera.
#12
Rennlist Member
Join Date: May 2012
Location: Mid-Atlantic (on land, not in the middle of the ocean)
Posts: 13,200
Received 4,434 Likes
on
2,521 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've gone through numerous sets of 08 F and 06 R in two cars, and have been very happy with them, to the point where I don't even have an interest in trying other pads anymore.
#15
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Those will fit, the 930, 944T, 964 stock fronts and rears (except the 90-91 C2 2 piston rears. Also fit the rear on the 993, and the 86.5 and up 928 rear. Same as Pagid U1203 and Hawk HB170.650