Mount Fuel Jug holder on Open Trailex?
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Mount Fuel Jug holder on Open Trailex?
All,
I would like to mount something to the side of my open trailex trailer to hold the fuel jugs so I can get them out of the tow vehicle. Has anyone come up with a good way of doing this? I was thinking right behind the trailer wheel on the side or at the front 'V' of the trailer.
Any success in doing this? How many jugs are being supported and where was it mounted? Can you point me to the container you use or post a pic or two?
Thanks,
-Skip
I would like to mount something to the side of my open trailex trailer to hold the fuel jugs so I can get them out of the tow vehicle. Has anyone come up with a good way of doing this? I was thinking right behind the trailer wheel on the side or at the front 'V' of the trailer.
Any success in doing this? How many jugs are being supported and where was it mounted? Can you point me to the container you use or post a pic or two?
Thanks,
-Skip
#2
Rennlist Member
I had a 3 jug holder at the front of my trailex, on the V if you will. I sold it a while back, so no pictures, but I got 4 of the trailex t bolts, slid them in the channels, drilled 4 holes in the jug holder, and just bolted it on. I used this http://www.pitproducts.com/fujugratrmo.html because it had a solid bottom and therefore less flexible than others that were meant for enclosed use and just have a small rim on bottom to hold jugs
#3
Rennlist Member
Skip;
I did exactly the same on my Trailex. Pit Pal jug holders bolted on the side rails between the axles and the tire rack vertical support. Have used it for 3 or for years, works great. I just run a large dia bungee through the handles of the jugs to secure.
Bob
I did exactly the same on my Trailex. Pit Pal jug holders bolted on the side rails between the axles and the tire rack vertical support. Have used it for 3 or for years, works great. I just run a large dia bungee through the handles of the jugs to secure.
Bob
#5
I had one of these two-jug holders mounted in the V...and loved it so much, I added a three-jug holder recently.
http://www.motorcycle-superstore.com...Jug-Racks.aspx
http://www.motorcycle-superstore.com...Jug-Racks.aspx
Trending Topics
#10
Rennlist Member
#15
Custom build just need to call and ask for fuel jug holder with locking bar to fit Trailex open trailer. Locking bar well worth extra cost. Just measure and drill 3/8 holes.