View Poll Results: Cool shirt tubing is routed through:
A hole in pocket
26
55.32%
Between the zippers in front
15
31.91%
Some other place
1
2.13%
I just sweat buckets to maximize weight loss
5
10.64%
Voters: 47. You may not vote on this poll
Cool Shirt Tubing - Through pocket or zipper?
#1
Rennlist Member
Thread Starter
Cool Shirt Tubing - Through pocket or zipper?
Now that I have a cool shirt system in the car and the temps have been getting nastier, it's time to try the thing out.
Some people tell me they run the cool shirt tubing through a hole in their fire suit 'side' pocket while others tell me they simply hang it out the zipper like you're wearing a **** bag.
What do most of you do?
Some people tell me they run the cool shirt tubing through a hole in their fire suit 'side' pocket while others tell me they simply hang it out the zipper like you're wearing a **** bag.
What do most of you do?
#5
Race Car
Scott
Trending Topics
#8
Rennlist Member
Should be two zippers. Out below the bottom zipper. And I think women will think that walking around with tubing coming out of my crotch is very sexy and cool.
Or... At least thats what the one who loves me says
Or... At least thats what the one who loves me says
#9
Rennlist Member
Should be two zippers. Out below the bottom zipper. And I think women will think that walking around with tubing coming out of my crotch is very sexy and cool.
Or... At least thats what the one who loves me says
Or... At least thats what the one who loves me says
#10
Rennlist Member
#12
Rennlist Member
I kinda thought it might be a good idea to keep fire away from my crotch, so I cut a hole in the left pocket 1/4 way up from the bottom. If it's too high up and near the opening, I thought it might allow heat and fire to enter the hole. Too far down and I lose all of the marbles that I leave in my pockets.
#13
Rennlist Member
Join Date: Mar 2004
Location: In the pasture.
Posts: 4,202
Likes: 0
Received 0 Likes
on
0 Posts
#14
Addict
Rennlist Member
Rennlist Member
In my old suit I had a tailor open the suit at the waist and insert a 3-layer nomex cloth 'tube' that I could thread the hose through when I used them and the tube was long enough to simply collapse and provide protection when not used (it was 6" long, 3" on each side). My new Momo suit has a flap that covers with a hole just above the waist that can be opened and used to thread the tubes through. I think I have pictures at home, I could post tonight.
#15
Burning Brakes