2" or 3" Shoulder Belts For Hans ???
02-22-2008 | 02:13 PM
#16
RL Technical Advisor
Joined: May 2001
Posts: 11,871
Likes: 67
From: Portland Oregon
You might take a few minutes to read through this:
http://www.schroth.com/installation-.../en/index.html
Its very informative and educational,......
http://www.schroth.com/installation-.../en/index.html
Its very informative and educational,......
02-22-2008 | 02:50 PM
#17
Rennlist Member
Joined: Oct 2004
Posts: 3,629
Likes: 60
From: Far, far away
George, absolutely take the advice here to talk to Joe Marko at HMS Motorsports (US importer of Schroth harnesses) and read the installation manual (link in previous post). The information you will get from that is about as good as you can get. Thank, as I do, the excellent posts on this thread. Rennlist is an amazing resource.
(I went with Schroth Hybrid II HANS-specific harness for the driver and Hybrid II non-HANS for passenger. the II indicates 2" lap belt and the HANS-specific is the 3"/2" shoulder belt. Bought three sets, so far.)
(I went with Schroth Hybrid II HANS-specific harness for the driver and Hybrid II non-HANS for passenger. the II indicates 2" lap belt and the HANS-specific is the 3"/2" shoulder belt. Bought three sets, so far.)
