Need these gone! Make an offer!! FS: Brand new 997 C4S/Turbo/GT3RS
11-07-2016, 01:16 PM
#1
The Rebel
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Need these gone! Make an offer!! FS: Brand new 997 C4S/Turbo/GT3RS
I have a set of brand new light weight, 3-piece, forged wheels for 997 wide bodied cars. I had these wheels in 19" set up and they were wonderful, then wanted them in 18", however prior to receiving them I decided to go to center-locks therefore these wheels have never been used. They are 100% brand new, have never had tires mounted on them.
Dimensions:
18"x10"
18"x12.5"
They were made to work with the 380mm PCCB rotor. They are meant to fit 275 or 285 tires up front and up to 345 in the rear. These are great for track car.
They're race pocketed and have titanium rivets all with weight reduction in mind.
They cost me $7500! I'm selling them for $2295 for the set plus shipping!! At this price these would make excellent track wheels.
They're boxed up and ready to be shipped.
These are made by COR for Strasse Forged Wheels. They weigh 18lbs in the front and 19.5lbs in the rear. The offset is custom to ensure they fit on 997 widebody cars.
Below are pics of what the 19" version of these wheels looked like on the car.
I'm open to offers.
Dimensions:
18"x10"
18"x12.5"
They were made to work with the 380mm PCCB rotor. They are meant to fit 275 or 285 tires up front and up to 345 in the rear. These are great for track car.
They're race pocketed and have titanium rivets all with weight reduction in mind.
They cost me $7500! I'm selling them for $2295 for the set plus shipping!! At this price these would make excellent track wheels.
They're boxed up and ready to be shipped.
These are made by COR for Strasse Forged Wheels. They weigh 18lbs in the front and 19.5lbs in the rear. The offset is custom to ensure they fit on 997 widebody cars.
Below are pics of what the 19" version of these wheels looked like on the car.
I'm open to offers.
Last edited by MJSpeed; 11-08-2016 at 12:39 AM. Reason: Need these gone!!
12-10-2016, 04:21 PM
#6
Rennlist Member
Do you have the back spacing measurements or offsets?
I have a 996 GT3 with a widebody kit (no the previous owner didn't do the suspension so it uses gigantic spacers to compensate) and I'm getting ready to order some track wheels. Thought I would check to see if these might work.
I have a 996 GT3 with a widebody kit (no the previous owner didn't do the suspension so it uses gigantic spacers to compensate) and I'm getting ready to order some track wheels. Thought I would check to see if these might work.
