WTB 997 rear suspension
#1
Rennlist Member
Thread Starter
WTB 997 rear suspension
The scheming continues:
I know some of you guys upgraded to RSR stuff, so I figure someone might have 997 GT3/ cup rear suspension bits around? I'm looking for uprights, links, rear subframe, etc. I don't need brakes, springs, shocks or axles, but would like basically everything else. If it's from a wreck or timed out I'd still be interested for fit-check purposes.
If anyone has one or knows where I might find one that'd be much appreciated.
I basically need everything in the image below except brakes, springs, shocks and axles:
Thanks!
I know some of you guys upgraded to RSR stuff, so I figure someone might have 997 GT3/ cup rear suspension bits around? I'm looking for uprights, links, rear subframe, etc. I don't need brakes, springs, shocks or axles, but would like basically everything else. If it's from a wreck or timed out I'd still be interested for fit-check purposes.
If anyone has one or knows where I might find one that'd be much appreciated.
I basically need everything in the image below except brakes, springs, shocks and axles:
Thanks!
#3
Rennlist Member
Thread Starter
That'd be very useful. PM sent.
#4
Former Vendor
Join Date: May 2012
Location: Petaluma CA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
ive got a new rt upright, 2 dogbones(rubber bushing), and lower control arms. if you are interested in 996 bits i have both subframes, crossmember, uprights and probably more if i look around some more.
#5
Rennlist Member
Thread Starter
Thanks guys, I've located a complete setup and its on the way to me.
I was surprised how little is different between the models. Per PET, the uprights, wishbones, control arms, etc are all the same as a 997.2 turbo or regular 997. Subframes and cross member are GT3 specific, and the RS gets some different links.
I'm getting the basic GT3 setup (but with 5 bolt lugs) to further my scheming. We'll see what becomes of it. Thanks for the parts offers, I'm sure I'll need something else at some point.
I was surprised how little is different between the models. Per PET, the uprights, wishbones, control arms, etc are all the same as a 997.2 turbo or regular 997. Subframes and cross member are GT3 specific, and the RS gets some different links.
I'm getting the basic GT3 setup (but with 5 bolt lugs) to further my scheming. We'll see what becomes of it. Thanks for the parts offers, I'm sure I'll need something else at some point.
#7
Rennlist Member
Thread Starter
As I said, per PET the 997.2 GT3 and Carrera have the same uprights, wishbones, control arms. 997.1 and 997.2 are different. I believe the Cup at least uses different wishbones, I haven't looked at the motorsports PET yet.
http://www.porsche.com/usa/accessori...artscatalogue/