mathisengineering

I'm going to be in Germany from 1/14 until 1/22 so let me know what you need but understand that communications will be slightly less frequent between now and then.

Thanks
Mark

mathisengineering

I have a low time 996 GT3 RSR transmission to sell - This box has been sold

It's a fresh true RSR box in excellent condition! It was a Flying Lizard Motorsport spare box just before converting to sequential. It's got fully splined shafts (replaceable 1st and 2nd gears), Motorsport RSR chromolly LSD (all the RSR stuff inside). Copans refreshed all the boxes after each event and they were always ready to race (regular service). This box has 0 time on it since Copans serviced it.

It comes with the side cooler and lines (not shown).

mater

Do you have any original 996 gt3 cup wing uprights?

Spartan

YGM on a pair of those calipers

ZSA Motorsport

This thread is awsome. its like every other day i'm excited to see what other wicked goodies the Flying LIzards are looking to lose...

996 RSR gear box...yummy.

Phokaioglaukos

Yeah, if only I had the money to buy it and the car to put it in!

mathisengineering

Sorry but I don't have any cup wings or uprights for them. I have RSR wing packages like the red one shown previously. Wing, uprights and rear deck - $6K

The uprights on the RSR cars mount to the chassis so they stay on back there when you most need it.

Mark

analogmike

LOL! They don't help much when the wings pass the car on the track, right Steve?

mathisengineering

I've had numerous inquiries about the brakes and ARB's.

Brakes - I have several pairs of the brake left ($2500/pair), some of the new rotors 14.9x1.4" ($300/pair) and hats that work on our LeMans prototype car that may be adapted to yours ($200 / pair).

ARB's - I have sold several kits so I'm making a new batch of parts right now. I make the bars up for your specific application but I use comon blades and cable controlers etc. Let me know if you are interested so I make enough parts to keep up. The complete kit is $5K for oversized (35mm hollow) front and rear bladed bars, cables, 7 position dual adjuster and near shifter mount, bar mounts and drop links. Each bar has 2x blades, one is cable adjusted and the other is positioned and locked to the bar manually.

Mark

P.J.S.

email sent to be added to parts distribtion list and a wheel set inquiry...

P.J.S.

Mark -- got your response and sent a couple questions back
thank you for the fast reply

mathisengineering

I have 3 used RSR PS pumps available for sale - $775 each delivered in North America. E-mail for a shipping estimate if your are outside NA. You can paypal me at oemexp@att.net using the "personal payment option" only

mathisengineering

I still have the following for sale:

2 of the 997 RSR power steering pumps - $750 each

4 sets of RSR E88 BBS wheels - $4,000 / set

~30 suspension sets from 997 RSR, we will part out individual pieces (all parts fit 996 and 997 cup cars) - part prices vary

11 pair of Alcon calipers - $2500/ pair

10+ pair of 14.9"x1.4" rotors - $400/ pair

Making 5 sets (cars) of in car adjustable 35mm hollow ARB's w/ bars, controllers, cables, mounts, factory RSR drop links - $5,000 / car

I now have several sets of rear 4-way adjustable Ohlins shocks (TT44). These are all working shocks but haven't been run in a few years so they may need to be recharged - The best condition shocks will ship first - $1,000/each
You will need to get top perches since we have sold all the top perches we had, all the shocks have the bottom perches still.

claykos

Why are you doing this to me, Mark? ;-)

mathisengineering

Because it feels so good!

On the one hand, I feel like Santa Claus, on the other, I'm finding that racers all over the world are busting open their kids piggy banks and routing kids college saving accounts to upgrade their cup cars!

Mark