997 Cup For Sale
01-28-2011, 12:34 PM
#1
Instructor
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
997 Cup For Sale
2006 GT3 Cup Car 997 For Sale
Car maintained by Todd Opperman at Topp Racing.
Fuel Cell
Motorola Radio
Cool Suit System
Camera System
One extra set of wheels included with the car.
For additional information call 817-223-8968 or email barry@firsttrackinvestments.com
$90,000
Car maintained by Todd Opperman at Topp Racing.
Fuel Cell
Motorola Radio
Cool Suit System
Camera System
One extra set of wheels included with the car.
For additional information call 817-223-8968 or email barry@firsttrackinvestments.com
$90,000
02-07-2011, 08:27 AM
#2
Bump for Barry's car which also had an engine rebuild by Kelly Moss which included...
Known parts replaced using new factory parts only:
Pistons & Cylinders with rings and wrist pins
New intake valves
New exhaust valves
New Valve springs
New Pankle conn rod bolts and recondition rods, plus crack check
Timing chains, rails and tensioners - all
oil lines and sending unit
All water hoses on engine
O2 sensors
Water / oil heat exchanger
Water pump
Spark plugs
Test coil packs and replace if needed
Test injectors and replace as needed
All parts Zyglo tested
all parts Magnafluxed
Heads pressure tested
Heads tested for hardness / yielding
Case line bore inspected
Oil pump clearanced and blueprinted
Full rotating assembly balanced
Fully blueprinted
Serti high performance valve job
Assembled, broken in on chassis dyno, power output tested , after dyno service completed
Known parts replaced using new factory parts only:
Pistons & Cylinders with rings and wrist pins
New intake valves
New exhaust valves
New Valve springs
New Pankle conn rod bolts and recondition rods, plus crack check
Timing chains, rails and tensioners - all
oil lines and sending unit
All water hoses on engine
O2 sensors
Water / oil heat exchanger
Water pump
Spark plugs
Test coil packs and replace if needed
Test injectors and replace as needed
All parts Zyglo tested
all parts Magnafluxed
Heads pressure tested
Heads tested for hardness / yielding
Case line bore inspected
Oil pump clearanced and blueprinted
Full rotating assembly balanced
Fully blueprinted
Serti high performance valve job
Assembled, broken in on chassis dyno, power output tested , after dyno service completed
02-13-2011, 07:42 PM
#6
Instructor
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
We are not sure. When Glen checked with Kelly Moss the rebuild records were in a trailer covered in snow. ECU was not reset when rebuild was done and it shows 106 hours. Best guess is around 50 hours on new motor.
Trending Topics
04-14-2011, 10:31 PM
#10
Instructor
Join Date: May 2010
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
That price is a little steep. We are interested but the price has to be closer to what everybody else takes. With 50hours on engine and gearbox a 2006 car is worth maybe $70000 in todays market. NGT has a 2007 with fresh rebuilds for $90000. And that is starting price
05-15-2011, 10:08 PM
#12
Instructor
Thread Starter
Join Date: Oct 2003
Location: Texas
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
What happened to the classified ads? There is a new format and you can not find anything. Is anything previously posted in the old format classifieds gone?
Car is still available.
Car is still available.
